122
Configuring Touch Panel / Mouse Settings
Chapt
er
7
T
ouc
h Pa
nel and
Mo
us
e
10
Configure each setting.
Select an item using the
V
and
v
buttons, and press the
ENTER button to display the setting screen for that item.
[Display Cursor]
Select whether to display the mouse cursor on the
screen during touch panel / mouse mode.
Select [Yes] or [No] in the setting screen that appears,
and press the ENTER button. The default setting is [No].
Restart the unit to apply changes to this setting.
[Calibration]
Select whether to calibrate the touch panel monitor so
that the position of the mouse cursor corresponds with
your touch during touch panel operations.
If you select [Yes], the unit will restart and the
calibration settings screen will appear at startup.
Follow the instructions on the screen that appears to
perform calibration.
• Always perform calibration when using a touch panel
monitor for the first time. A beeping sound will be
emitted with each touch until calibration is complete.
The calibration process will require you to restart the
unit multiple times.
• Perform calibration again whenever you notice a
decrease in touch accuracy.
• For details on how to perform calibration, contact
your local Sony representative.
11
After editing the settings, select [Apply] and press the
ENTER button.
Follow the instructions in the message that appears,
connect the touch panel monitor or mouse, and turn on
the unit.
Notes
Summary of Contents for HVO1000MD
Page 148: ......