Sony HVO1000MD, User Manual, Page: 108 / 148

108
Initial User Settings
C
h
ap
te
r 6
Sy
ste
m
A
d
m
ini
st
ra
to
r S
e
tti
n
g
s
[Save 3D Still] (HVO-3000MT only)
Select whether you will save still images in 3D format,
and press the ENTER button.
The default setting is [Yes].
[Save 2D Still] (HVO-3000MT only)
Select whether you will save still images in 2D format,
select the input if so, and press the ENTER button.
The default setting is [No].
This setting will be applied to 3D still images.
[Folder Structure]
Select the directory structure that will be used when
writing to external media in the setting screen that
appears, and press the ENTER button.
The default setting is [Recording Date + Patient ID].
When recorded data with the same patient ID is
created, a new recording date and time folder is created
under the patient ID folder, and the recorded data is
saved to the new folder.
[File Division Size]
Select the size interval for file splitting in the setting
screen that appears, and press the ENTER button. The
default setting is [2 GB].
3
When you finish configuration, use the
V
,
v
,
B
, and
b
buttons to select [Apply], and press the ENTER
button.
The [MENU] screen appears again.
To configure metadata output settings
When metadata output is enabled, specify the information
to output and the format of the metadata.
1
Use the
B
and
b
buttons to select [Advanced], and
press the ENTER button.
The [Advanced] screen appears.
Note
Note