43
Recording Preparation
Cha
p
te
r 4
Re
c
o
rdin
g
a
nd Pla
y
bac
k
• When NTSC is selected as the video format under the
system administrator settings, PAL-format recorded data
cannot be played back properly. Conversely, when PAL
is selected, NTSC-format recorded data cannot be
played back properly.
• The playback video will be output from the connector
that corresponds to the input connector that was used
during recording. If the input connector used for
recording was changed anytime before you start
playback, playback video will not be displayed.
Recording Preparation
Before starting to record, enter information regarding the
patient of the surgical procedure or examination, configure
the storage destination and quality settings for recorded
data, and then perform a test recording.
You can also register information for multiple patients in
advance, and simply recall the corresponding patient
information on the day of the procedure or examination.
You can prepare for recording and test record in the
[Recording Preparation] screen.
Patient Information and Data
Storage Settings
Enter information regarding the patient of the surgical
procedure or examination, and configure the storage
destination and quality settings for recorded data.
1
Press the MENU button.
The [MENU] screen appears.
2
Use the
V
and
v
buttons to select [Recording
Preparation], and press the ENTER button.
The [Recording Preparation] screen appears.
3
Enter patient information.
Select an item using the
V
,
v
,
B
, and
b
buttons, and
press the ENTER button to display the setting screen
Summary of Contents for HVO-500MD
Page 106: ......