43
Step 1: Record
1
Press the
z
REC button.
Recording starts.
“REC” appears while recording is in progress.
If images are recorded and patient information has
not been entered in the [Recording Preparation]
screen, patient IDs will be automatically assigned.
The letter “U” appears at the beginning of
automatically assigned patient IDs.
2
Press the
x
STOP button to stop recording.
Recording stops, and “STOP” appears.
If the surgical procedure or examination is finished
and you want to end the recording session, proceed to
“Step 4: End Recording” (page 45)
and perform the
recording end procedure.
If you press the
z
REC button again, recording will start
again as a new recorded data entry.
Tip
z
REC button
Patient ID
This appears when audio is
also being recorded.
x
STOP button
Tip
Summary of Contents for HVO-4000MT
Page 117: ......
