43
If the surgical procedure or examination is finished
and you want to end the recording session, proceed to
“Step 4: End Recording” (page 44)
and perform the
recording end procedure.
If you press the
z
REC button again, recording will start
again as a new recorded data entry.
Step 2: Capture Still
Images
Capture still images from live image transmissions.
Up to 500 still images can be captured for a single
recorded data entry.
Press the
CAPTURE button.
When you capture an image, the capture number appears.
The still image data is saved.
For details on capturing still images, see “Capture Still
Images” (page 50).
Recorded data entries are created when still images are
captured.
If the surgical procedure or examination is finished and
you want to end the recording session, proceed to
and perform the recording
end operation.
Tip
CAPTURE button
Patient ID
Capture counter
Summary of Contents for HVO-3300MT
Page 99: ......
