41
• [Recording]: Record video and audio.
• [Set Chapter]: Insert a chapter separator without saving
a still image of the recording.
• [Close Folder]: End the recording session.
Other Assignable Functions
Aside from the factory assigned functions, the following
functions can also be assigned to the function keys.
• [Audio Rec On]: Record audio.
• [Audio Rec Off]: Disable audio recording.
• [SDI 2D]: Switch the Ch1 input signal to SDI 2D.
• [SDI 3D (2 Stream)]: Switch the Ch1 input signal to
SDI 3D (2 stream).
• [SDI 3D (Side by Side)]: Switch the Ch1 input signal to
SDI 3D (side-by-side).
• [SDI 3D (Line by Line)]: Switch the Ch1 input signal to
SDI 3D (line-by-line).
• [DVI-D 2D]: Switch the Ch1 input signal to DVI-D 2D.
• [DVI-D 3D (2 Stream)]: Switch the Ch1 input signal to
DVI-D 3D (2 stream).
• [DVI-D 3D (Side by Side)]: Switch the Ch1 input
signal to DVI-D 3D (side-by-side).
• [DVI-D 3D (Line by Line)]: Switch the Ch1 input
signal to DVI-D 3D (line-by-line).
• [VIDEO]: Switch the Ch1 input signal to VIDEO.
• [S VIDEO]: Switch the Ch1 input signal to S VIDEO.
• [Menu Display]: Display the [MENU] screen.
• [Chapter Next]: Jump forward to the next chapter.
• [Chapter Back]: Jump back to the previous chapter.
• [1 GOP Next]: Jump forward to the next GOP.
• [1 GOP Back]: Jump back to the previous GOP.
• [Eject]: Eject the inserted disc.
• [Rec List Display]: Display the [Recording List] screen.
• [Status Display On]: Display the unit’s operation status
(i.e., recording, play, pause).
• [Status Display Off]: Hide the unit’s operation status
(i.e., recording, play, pause).
• [PinP On (Ch1)]: Enable the PinP function for Ch1.
• [PinP On (Ch2)]: Enable the PinP function for Ch2.
• [PinP Off (Ch1)]: Disable the PinP function for Ch1.
• [PinP Off (Ch2)]: Disable the PinP function for Ch2.
• [PinP (Sub)]: Display the Ch1 RGB input image as the
inset image.
• [PinP (Main)]: Display the Ch1 RGB input image as the
main image.
• [Test Record]: Perform a test recording.
• [Ch2 Rec]: Start Ch2 recording.
• [Ch2 Stop]: Stop Ch2 recording or playback.
• [Ch2 Play]: Play back Ch2 recorded data.
• [Ch2 Pause]: Pause Ch2 recording or playback.
• [Ch2 Capture]: Capture the Ch2 input image as a still
image.
• [Streaming On]: Start streaming.
• [Streaming Off]: Stop streaming.
• Switching the Ch1 input signal via the functions does
not change the [User Settings].
• Function keys related to Ch2 will not function when
pressed in the following cases.
– When [CMS Mode] is set to [Use] in the [System
Admin Settings] screen – [Function Settings] screen –
[CMS] tab and [Ch2 Rec] is set to [Not Used] in the
[User Settings] screen – [Rec/Streaming] tab
– When [Ch2 Rec] is set to [Not Used], [Link to Ch1], or
[Create 2D from Ch1] in the [User Settings] screen –
[Rec/Streaming] tab
– When [Streaming] is set to [Stream Ch1 in 2D] or
[Stream Ch1 in 3D] in the [User Settings] screen –
[Rec/Streaming] tab
Tips
Summary of Contents for HVO-3300MT
Page 99: ......
