Sony HVO-3300MT, Instructions For Use Manual

Page: 25 / 99

25
g
RGB input connector (15-pin mini D-sub)
Inputs RGB signals.
h
S VIDEO output connector (4-pin mini DIN)
Outputs analog S-Video signals.
i
S VIDEO input connector (4-pin mini DIN)
Inputs analog S-Video signals.
Infrared Remote Control Unit
(RM-M010)
a
CAPTURE button
Use this to capture still images.
A chapter separator is also created at the position in
which the still image was captured.
For details on use, see “Capture Still Images”
(page 50).
b
z REC button
Use this to start video/audio recording.
During recording, “REC” appears on the front panel
display in addition to the recording time.
For details on use, see “Manual Recording”
(page 49).
c
X
PAUSE button
Use this while recording is in progress to pause
recording. Press this button again to resume
recording.
A chapter separator is also created at the position in
which recording was paused.
You can also use this button to pause playback.
To resume playback, press this button again or press
the
B
PLAY button.
“PAUSE” appears on the front panel display during
pause.
d
m
REW button
Use this to rewind during playback of recorded data.
B
PLAY button
• Use this to play back the most recent recorded data
stored on the internal hard disk, or to play back the
recorded data selected in the [Recording List] or
[Image List] screen.
• Press this button while playback is paused to
resume playback.
M
FF button
Use this to fast forward during playback of recorded
data.
x
STOP button
Use this to stop recording or playback.
A title separator is also created at the position in
which recording was stopped.
e
NEW FOLDER button
Use this to display the [Recording Preparation]
screen to start recording a new surgical procedure or
examination.
For details on use, see “Recording Preparation”
(page 45).
f
CLOSE FOLDER button
Use this to display the [End Recording] screen which
is used to end surgical procedure or examination
recordings.
For details on use, see “Step 4: End Recording”
(page 44).
g
Menu navigation buttons
Use these to navigate menus.
MENU button
Display or hide the menu.
v
button
Use this to move the cursor down or select an item
that is below the current item.
b
button
Use this to move the cursor right or select an item that
is to the right of the current item.
ENTER button
Use this to confirm a currently selected menu or item,
and execute operations.