15
US
HT-XT3
4-558-560-
12
(1)
D:\NORM'S JOB\SONY HA\SO150016\HT-XT3 (PMRF
03)\4558560121_USCaFRLaES (UC2)\US\040BLU.fm
masterpage:
Right
BLU
E
T
OOT
H F
u
n
c
tion
2
Set [Bluetooth Mode] to
[Transmitter] in [Bluetooth
Settings] (page 24).
3
Press
/
to select [OK].
4
Press
/
to select the
BLUETOOTH receiver’s name from
[Device List] in [Bluetooth
Settings] (page 25), then press
.
When the BLUETOOTH connection
is established, the blue LED
indicator lights up.
If you cannot find your BLUETOOTH
receiver’s name in the list, select
[Scan].
5
Start playback the source via this
system.
The sound is output from the
BLUETOOTH receiver.
6
Adjust the volume.
Adjust the volume of the
BLUETOOTH receiver.
When connected to a BLUETOOTH
receiver, volume level of the unit
cannot be controlled. Volume touch
keys on the unit and buttons on the
remote control only works for the
BLUETOOTH receiver.
You can register up to 9 BLUETOOTH
receivers. If the 10th BLUETOOTH receiver
is registered, the least recently connected
BLUETOOTH receiver will be replaced by
the new one.
The system can display up to 15 detected
BLUETOOTH receivers in the [Device List].
You cannot change the sound effects or
settings in Options menu during sound
transmitting.
Some contents cannot be output due to
content protection.
The audio output from the BLUETOOTH
receiver may be delayed from that on the
system because of the characteristics of
the BLUETOOTH wireless technology.
No sound is output from system’s
speakers and HDMI OUT (ARC) jack when
BLUETOOTH receiver is successfully
connected to the system.
[Screen mirroring] input, [Bluetooth
Audio] input and Home Theatre Control
function are disabled when the system is
in transmitter mode.
Once the system and BLUETOOTH
receiver are connected, you can control
playback by using playback operation
buttons on the BLUETOOTH receiver.
You can connect this system to the most
recently connected BLUETOOTH receiver
by pressing RX/TX
repeatedly to
select [Transmitter]. Then, start playback
the source on the system.
To disconnect the BLUETOOTH
receiver
Perform any of the following items.
Disable the BLUETOOTH function on
BLUETOOTH receiver.
Set [Bluetooth Mode] to [Receiver] or
[Off] (page 24).
Turn off the system or the BLUETOOTH
receiver.
Perform the One-touch function (NFC).
To delete a registered
BLUETOOTH receiver
1
Select [Device List] in [Bluetooth
Settings] (page 25).
A list of paired and detected
BLUETOOTH receivers appears.
2
Press
/
to select the device, then
press OPTIONS.
3
Press
/
to select [Remove], then
press .
4
Press
/
to select [OK], then press
.
Note
Note
Tip
