Sony HT-XT2, Operating Instructions Manual

Page: 43 / 227

43
US
U
s
in
g
th
e
V
a
ri
o
u
s
Fu
n
c
ti
o
n
s
/
S
e
tt
in
g
s
By updating your software to the latest
version, you can take advantage of the
newest functions.
For information about update functions,
visit the following website:
http://www.sony.com/
soundbarsupport
• An Internet environment is necessary to
perform updates via Internet.
• During a software update, “UPDT”
appears in the front panel display. After
the update is complete, the system
automatically reboots. While the
updating operation is in progress, do not
turn on or off the system or operate the
system or TV. Wait for the software
update to complete.
• Set [Auto Update] to [On] when you want
to perform software updates
automatically (page 46). Software update
may be performed even if you select [Off]
in [Auto Update] depending on the details
of the updates.
[Update via Internet]
Updates the system’s software using
the available network. Follow the
instructions on the screen. Make sure
network is connected to the Internet.
[Update via USB Memory]
Updates software using USB memory.
Make sure that the software update
folder is correctly named “UPDATE.”
[TV Type]
[16:9]: Select this when connecting to a
wide-screen TV or a TV with a wide-
mode function.
[4:3]: Select this when connecting to a
4:3 screen TV without a wide-mode
function.
[Output Video Resolution]
[Auto]: Outputs video signal according
to the resolution of the TV or connected
device.
[480i/576i]*, [480p/576p]*, [720p],
[1080i], [1080p]: Outputs video signal
according to the selected resolution
setting.
* If the color system of the playback
content is NTSC, the video signals
resolution can be converted to [480i] and
[480p] only.
[24p Output]
[Network content 24p Output]
This function sets the signals output
from the HDMI OUT (ARC) jack on the
system when using the Screen mirroring
function with 1080/24p contents.
[Auto]: Outputs 24p video signals only
when you connect a 1080/24p-
compatible TV via an HDMI connection
and the [Output Video Resolution] is set
to [Auto] or [1080p].
[Off]: Select this when your TV is not
compatible with 1080/24p video
signals.
[4K Output]
[Auto1]: Outputs 2K video signals during
Screen mirroring and 4K video signals
during photo playback when connected
to a 4K-compatible device
manufactured by Sony.
[Auto2]: Outputs 4K video signals
during 24p content playback with
Screen mirroring or photo playback
when you connect a 4K/24p-compatible
device.
[Off]: Turns off the function.
• If your device manufactured by Sony is
not detected when [Auto1] is selected, the
setting will have the same effect as
[Auto2] setting.
• [Network content 24p Output] in [24p
Output] needs to be set appropriately for
[Auto2].
[Software Update]
Notes
[Screen Settings]
Notes