masterpage:Right
lename[E:\SEM_Janet\Revision_SF800M\J9050000_2592136121SF800M_GB\2592136121\G
B02REG_HT-SF800M-CEL.fm]
model name[HT-SS600/HT-SF800M]
[2-592-136-
12
(1)]
3
GB
About This Manual
• The instructions in this manual are for model
HT-SF800M and HT-SS600. Check your receiver’s
model number by looking at the lower right corner of
the front panel. In this manual, the model of area
code CEL is used for illustration purposes unless
stated otherwise.
• The instructions in this manual describe the controls
on the remote. You can also use the controls on the
receiver if they have the same or similar names as
those on the remote. For details on the use of your
remote, see pages 31–34.
The HT-SF800M consists of:
• Receiver
STR-KS600PM
• Speaker system
– Front speakers
SS-MSP800
– Center speaker
SS-CNP800
– Surround speakers
SS-MSP800B
– Subwoofer SS-WMSP600
The HT-SS600 consists of:
• Receiver
STR-KS600P
• Speaker system
– Front speaker (left)
SS-MSP600L
– Front speaker (right)
SS-MSP600R
– Center speaker
SS-CNP600
– Surround speaker (left)
SS-MSP600SL
– Surround speaker (right)
SS-MSP600SR
– Subwoofer SS-WMSP600
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
** “DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
About area codes
The area code of the receiver you purchased is
shown on the lower portion of the rear panel (see
the illustration below).
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
“Models of area code AA only”.
FRONT R
– +
CENTER
– +
FRONT L
– +
SURR R
+ –
SUBWOOFER
+ –
SURR L
+ –
2-XXX-XXX-XX AA
Area code
GB01COV_HT-SF800M-CEL.book Page 3 Monday, March 28, 2005 4:03 PM