Sony HT-S40R, Operating Instructions Manual

Page: 33 / 52

33 GB
[SYSTEM]
(Speaker
system
settings)
[AUTO STANDBY] • [ON]: Turns on the auto standby function. When you do
not operate the speaker system for about 20 minutes, the
speaker system enters standby mode automatically.
• [OFF]: Off.
[VERSION]
(Version
information) The current firmware version information of the speaker
system appears in the front panel display.
[SUR. AMP. INFO]
(Wireless amplifier
version
information) • [LATEST]: The wireless amplifier is the latest version.
• [PLEASE UPDATE]: The wireless amplifier is not the latest
version.
• [NOT CONNECTED]: The wireless amplifier is not connected
to the subwoofer.
[RESET]
(Resetting the
speaker
system)
[ALL RESET] You can reset the speaker system settings to the factory
default. For details, see “Resetting the Speaker System”
(page 41).
[UPDATE]
(Updating the
speaker
system)
[START] You can start software update after connecting the USB
memory on which the software update file is stored to the
speaker system. When there is a software update available,
we will notify you on the following website:
• For customers in Americas
https://www.sony.com/am/support
• For customers in Europe
https://www.sony.eu/support
• For customers in Asia-Pacific, Oceania, Middle East, and
Africa
https://www.sony-asia.com/support
Note
Before updating, make sure that the wireless amplifier
is turned on and connected to the subwoofer.
[CANCEL] Returns to the upper layer [UPDATE].
Items Function