28
GB
Notes on HDMI
Connections
• Use an HDMI-authorized cable.
• We recommend using a Sony High
Speed HDMI Cable with Ethernet with
the Cable Type Logo.
• We do not recommend using an
HDMI-DVI conversion cable.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from an HDMI
jack may be suppressed by the
connected device.
Saving Power
Consumption
To use the Sound Bar while saving
power consumption, change the
following settings.
When you set the auto standby function
to on, the Sound Bar enters standby
mode automatically when you do not
operate the Sound Bar for about 20
minutes and the Sound Bar is not
receiving an input signal.
Press and hold INDICATORS for 5
seconds to set the function to on or
off.
To save power consumption during the
standby mode, set the BLUETOOTH
standby mode (page 24) and Control for
HDMI function (page 26) to off.
The default settings for them are on.
Turn the Sound Bar Off by
Detecting the Using State
Auto standby on
The BLUETOOTH indicator flashes twice.
The default setting for models of the Europe
countries is on.
Auto standby off
The BLUETOOTH indicator flashes once.
The default setting for India/Australia/New
Zealand models is off.
Saving Power in Standby
Mode
