54
US
This setting is for using wireless
speakers (not supplied) as the surround
speakers of the system. For details, see
“Adding Rear Speakers (Wireless
Surround)” (page 40).
[OSD Language]
You can select the language you want
for the system on-screen display.
[Wireless Subwoofer Connection]
You can perform wireless connection of
the subwoofer again. For details, see
“Performing the Wireless Connection of
the Subwoofer (LINK)” (page 42).
[IR-Repeater]
[On]: Remote signals for the TV are sent
from the rear of the Bar Speaker
(page 46).
[Off]: Turns off the function.
For details, see “Performing the
Wireless Connection of the Subwoofer
(LINK)” (page 42).
[HDMI Settings]
• [Control for HDMI] (page 46)
[On]: The Control for HDMI function is
enabled. Devices connected with an
HDMI cable can control each other.
[Off]: Off
• [Standby Linked to TV] (page 47)
This function is available when you set
[Control for HDMI] to [On].
[Auto]: If the input of the system is
[TV], [HDMI1], [HDMI2], [HDMI3], or
[Screen mirroring], the system turns
off automatically when you turn off
the TV.
[On]: The system turns off
automatically when you turn off the TV
regardless of the input.
[Off]: The system does not turn off
when you turn off the TV.
• [Audio Return Channel] (page 47)
Set this function when the system is
connected to a TV’s HDMI IN jack that
is compatible with Audio Return
Channel. The function is available
when you set [Control for HDMI] to
[On].
[Auto]: You can listen to TV sound
from the speakers of the system.
[Off]: Use this setting when an optical
digital cable is connected.
• [Standby Through] (page 48)
This function is available when you set
[Control for HDMI] to [On].
[Auto]: Signals are output from the
system’s
HDMI OUT (ARC) jack when
the TV is turned on while the system is
not turned on. The system standby
power consumption can be reduced
more than when set to [
On].
[
On]: Signals are always output from
the system’s
HDMI OUT (ARC) jack
when the system is not turned on. If
you connect a TV other than those
manufactured by Sony, we
recommend that you select this
setting.
[
Off]: Signals are not output from the
system’s
HDMI OUT (ARC) jack when
the system is not turned on. Turn on
the system to enjoy on the TV content
of a device connected to the system.
The system standby power
consumption can be reduced more
than when set to [
On].
• [HDMI Signal Format]
When you display High-Quality 4K
format* with the HDMI input, perform
this setting.
[Standard format]: Standard format
for normal use.
[Wireless Surround
Settings]
[System Settings]
