47
GB
Ot
h
e
r f
unc
tions
Depending on the TV, volume number of the unit
appears on the TV screen. The number on the TV
screen may be different from that on the front
panel display of the unit.
When you play the equipment with an
HDMI cable, the connected TV is turned on
automatically and the TV’s input is
switched to the system.
When you perform One-Touch Play on the
connected equipment, the unit is turned on
automatically, and the function is set to
“HDMI1” or “HDMI2” (depending on the
HDMI input jack in use), and your TV’s
input is automatically set to the HDMI
input which the system is connected.
• The above features may not operate with certain
equipment.
• Depending on the settings of the connected
equipment, the Control for HDMI function may
not work correctly. Refer to the operating
instructions of the equipment.
You can enjoy TV sound via the system by
using just one HDMI cable.
For details, see [Audio Return Channel]
(page 74).
The Auto Genre Selector function acquires
the program information (EPG
information) for the digital broadcast you
are currently watching to switch the sound
field automatically according to the genre
of the program (only when your TV and
device connected to the HDMI IN
(HDMI 1/HDMI 2) jacks are compatible
with the Auto Genre Selector function).
Check that you have made the following
settings:
– [Control for HDMI] in [HDMI Settings]
is set to [On] (page 53).
– [Auto Genre Selector] in [Audio
Settings] is set to [On] (page 53).
– [Sound Effect] in [Audio Settings] is set
to [Sound Field On] (page 52).
– [Sound Field] is Cle.
You can set [Sound Field] by pressing
CLE.
Setting the Speakers
[Speaker Settings]
To obtain optimum surround sound, set the
speakers’ distance from your listening
position.
1
Press HOME.
The home menu appears on the TV
screen.
2
Press
B
/
b
to select
[Setup].
3
Press
V
/
v
to select [Audio
Settings], then press
.
Tip
One-Touch Play
Notes
Audio Return Channel
(ARC)
Auto Genre Selector
Note
