30
GB
Press AMP MENU, then press
AUTO CAL.
Measurement starts in 5 seconds and the
display changes as follows:
A.CAL [5]
t
A.CAL [4]
t
A.CAL [3]
t
A.CAL [2]
t
A.CAL [1]
While the time is counting down, stand away
from the measurement area to avoid
measurement error.
The table below shows the display when
measurement starts.
* The corresponding speaker indicator lights up in
the display during measurement.
The measurement process will take a few
minutes to complete.
When measurement ends, “COMPLETE”
appears on the display and the settings are
registered.
After you have finished
Disconnect the optimizer microphone from the
receiver.
Note
Auto Calibration cannot detect the sub woofer.
Therefore, all sub woofer settings will be
maintained.
Tip
The Auto Calibration function will be canceled
when you do the following during the measurement
process:
– Press
?
/
1
, input buttons or MUTING.
– Change the volume level.
– Press AUTO CAL again.
Performing Auto Calibration
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
TV
?/1
AV
?/1
VIDEO 1
VIDEO 2
VIDEO 3
DVD
2CH
A.F.D.
RETURN/EXIT
MENU
MOVIE
MUSIC
MEMORY DVD MENU
FM MODE
CLEAR
TOOLS
DISPLAY
MUTING
TV VOL
MASTER VOL
AUTO CAL
D.TUNING
D.SKIP
AMP MENU
SAT
TV
SA-CD/CD TUNER
?/1
-
V
B
b
v
5
>10/
Input
buttons
?
/
1
switch
MUTING
MASTER
VOL +/–
AUTO CAL
AMP MENU
Measurement for
Display
Environment noise level
NOISE.CHK
Speaker connection
MEASURE and SP
DET. appears
alternately*
Speaker level
MEASURE and
GAIN appears
alternately*
Speaker distance
MEASURE and
DISTANCE appears
alternately*
