62
GB
Enter the frequency of a station directly by
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1
b
0
b
2
b
5
b
0
Example 2: AM 1,350 kHz
Select 1
b
3
b
5
b
0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
4
Press ENTER.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
(Except for models of area code EA
only)
You can change the AM tuning scale to either
9 kHz or 10 kHz.
1
Press TUNER repeatedly to
select AM.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press
V
/
v
repeatedly to select
“4-TUNER”.
4
Press
or
b
to enter the
menu.
5
Press
V
/
v
repeatedly to select
“AM STEP”.
6
Press
or
b
to enter the
parameter.
7
Press
V
/
v
repeatedly to select
the AM tuning scale you want.
Note
All AM preset stations will be erased when you
change the tuning scale.
Tuning into a station directly
(Direct Tuning)
Changing the AM tuning scale
