Sony HT-DDW680 Operating Instructions Manual Download Page 52

Page: 52 / 60

F:\Sony SEM HA\Data_DDW680\J9051833_2661459311DDW680_GB\2661459311\050AMP_HT-
DDW680_E51.fm

masterpage: Left

HT-DDW680

2-661-459-

(1)

If color irregularity is observed
again...

Place the speaker further away from the TV
set.

If howling occurs

Reposition the speakers or turn down the
volume on the receiver.

On cleaning

Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.

If you have any questions or problems
concerning your receiver, please consult your
nearest Sony dealer.

Troubleshooting

If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem.

There is no sound, no matter which
component is selected, or only a very
low-level sound is heard.

• Check that the speakers and components

are connected correctly and securely.

• Check that both the receiver and all

components are turned on.

• Check that MASTER VOLUME is not set

to “VOL MIN”.

• Check that the headphone is not

connected.

• Press MUTING to cancel the muting

function.

• Check that you have selected the correct

component with the input buttons.

• The protective device on the receiver has

been activated. Turn off the receiver,
eliminate the short-circuit problem, and
turn on the power again.

There is no sound from a specific
component.

• Check that the component is connected

correctly to the audio input jacks for that
component.

• Check that the cord(s) used for the

connection is (are) fully inserted into the
jacks on both the receiver and the
component.

• Check that you have selected the correct

component on the receiver.

010COV_HT-DDW680_E51.book Page 52 Wednesday, January 18, 2006 10:55 AM

Summary of Contents for HT-DDW680





























































Search results

Summary of Contents for HT-DDW680

Reviews:

Related manuals for HT-DDW680

Brands by name

Popular brands

Sony HT-DDW680, Operating Instructions Manual

Search results

Summary of Contents for HT-DDW680

Reviews:

Related manuals for HT-DDW680

Brands by name

Popular brands