Sony HT-CT500 (HT-CT500), Operating Instructions Manual, Page: 92 / 340

92
US
• You can confirm the pairing completion or
the current ID by checking the [S-AIR
Settings] screen. [(Pairing)] appears
beside the current S-AIR ID.
10
Press GUI MENU.
The GUI menu turns off.
• After you have performed pairing, if you select
the [S-AIR ID] menu (page 90), the ID setting
([A], [B], or [C]) that you last used is
displayed.
If pairing fails
The message, [Pairing failed. Retry?], appears.
To perform pairing again, select [Yes].
To finish pairing, select [No].
To quit pairing during setting
Press RETURN/EXIT.
To cancel pairing
Perform the ID setting of the subwoofer
according to the procedure of “To set the ID of
the subwoofer” (page 87). If you reset the ID
(even the same ID again), pairing is canceled.
If sound transmission is
unstable
If you use multiple wireless systems that share
the 2.4 GHz band, such as wireless LAN or
Bluetooth, the transmission of S-AIR products or
other wireless systems may be unstable. In this
case, the transmission may be improved by
changing the following [RF Change] setting.
1
Press GUI MENU.
“GUI MENU” appears in the front panel
display of the subwoofer and the GUI menu
appears on the TV screen.
2
Press
X
/
x
repeatedly to select
[Settings], then press or c .
The settings menu appears.
3
Press
X
/
x
repeatedly to select [S-AIR],
then press .
The S-AIR menu appears.
• When the S-AIR transmitter (not supplied)
is not inserted into the subwoofer, [S-AIR]
cannot be selected.
4
Press
X
/
x
repeatedly to select [RF
Change], then press or c .
Tip
Note
Note
MENU
YELLOW BLUE RED GREEN
GUI MENU
TOOLS/
OPTIONS
RETURN/
EXIT
PRESET ADVANCE REPLAY
TUNING
PRESET
TUNING
HOME
DISPLAY
GUI
MENU
C
,
X
,
x
,
c
,