background image

SERVICE MANUAL

Sony Corporation

Published by Sony Techno Create Corporation

SPECIFICATIONS

9-893-767-02

2013K33-1

© 

2013.11

US Model

Canadian Model

AEP Model

UK Model

Australian Model

Ver. 1.1  2013.11

•  All of the units included in the HT-CT260H 

(SA-CT260H/SA-WCT260H) are required to 
confi rming operation of SA-CT260H. Check 
in advance that you have all of the units.

HT-CT260H

SA-CT260H

HT-CT260H

HOME THEATRE SYSTEM

SA-CT260H

ACTIVE SPEAKER SYSTEM

COMPONENT  MODEL  NAME

HT-CT260H

Sound Bar (Active speaker system)

SA-CT260H

Subwoofer (Active Subwoofer)

SA-WCT260H

•  Please refer to service manual separatery issued for subwoofer.

Formats supported by this system

HDMI

Input/Output (HDMI Repeater block)

Dolby Digital

DTS

Linear PCM 2ch 48 kHz or less 

Amplifier section

U.S. models:
POWER OUTPUT AND TOTAL HARMONIC 
DISTORTION :
(FTC )
Front L + Front R:

With 4 ohms loads, both channels 
driven , from 200 - 20,000 Hz; rated 
25 Watts  per channel  minimum RMS  
power, with no more than 1% to tal 
harmonic distortion from 
250 milliwatts to rated output.

POWER OUTPUT (reference)

Front L/Front R: 85 W 
(per channel at 4 ohms, 1 kHz)

Canadian AEP, UK and Australian models:
POWER OUTPUT (rated)

Front L + Front R: 50 W + 50 W 
(at 4 ohms, 1 kHz, 1% THD)

POWER OUTPUT (reference)

Front L/Front  R:  85 W  (per  channel at 
4 ohms, 1 kHz)

Inputs

HDMI IN
ANALOG IN
OPTICAL IN

Output

HDMI TV OUT (ARC)

BLUETOOTH section 

Communication system

BLUETOOTH Specification version
3.0

Output

BLUETOOTH Specification Power
Class 2

Maximum communication range 

Line of sight approx. 10 m (33 feet)

1)

Frequency band 

2.4 GHz band (2.4000 GHz - 
2.4835 GHz) 

Modulation method 

FHSS (Freq Hopping Spread 
Spectrum) 

Compatible BLUETOOTH profiles

2)

A2DP (Advanced Audio Distribution 
Profile)  
AVRCP 1.4 (Audio Video Remote
Control Profile) 

Supported Codecs

3)

SBC

4)

Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling 
frequency 44.1 kHz)

1) The actual range will vary depending 

on  factors  such  as obstacles between 
devices, magnetic fields around a 
microwave oven, static electricity, 
cordless ph one, reception sensitivity, 
operating system, software 
application, etc.

2) BLUETOOTH standard profiles 

indicate the purpose of BLUETOOTH
communication between devices.

3) Codec: Audio signal compression and 

conversion format

4) Subband Codec 

Fron t speaker un it

Speaker system

Full range speaker system, 
Bass Reflex

Speaker unit

Woofer: 55 mm × 80 mm
(2 1/4 in × 3 1/4 in) cone type

Ra ted impedance

4 ohms

General

Power requirements

120 V AC, 60 Hz (US and Canadian models)
220 V - 240 V AC, 50/60 Hz
 (AEP, UK and Australian models)

Power consumption

On: 32  W
“Control for HD MI” is off (Standby 
mode):  0.5 W or less
BLUETOOTH Standby mode: 0.5 W 
or less
Dimensions (approx.)
940 mm × 102 mm × 95 mm 
(37 1/8 in × 4 1/8 in × 3 3/4 in) 
(with stands)
940 mm × 90 mm × 100 mm
(37 1/8 in × 3 5/8 in × 4 in) 
(without stands)

Mass (approx.)

2.2 kg (4 lb 13 5/8 oz)

Wireless transmitter/receiver

Frequency band

2.4 GHz band (2.404 GHz - 
2.476 GHz)

Modulation method

GFSK

Design and specifications are subject to 
change without notice.

s

Standby power consumption: 0.5 W 
or less (Sound Bar), 0.5 W or less 
(Subwoofer)

File

2D

3D

Frame packing

Side-by-Side 

(Half )

Over-Under

(Top-and -

Bottom)

1920 × 1080p  @  59.94/60 Hz

1920 × 1080p  @  50 Hz

1920 × 1080p @ 23.98/24 Hz

1920 × 1080i  @ 59.94/60 Hz

1920 × 1080i  @ 50 Hz

1280 × 720p @ 59.94/60 Hz

1280 × 720p @ 50 Hz

720 × 480p  @  59.94/60 Hz

720 × 576p @ 50 Hz

640 × 480p @ 59.94/60 Hz

This system incorporates Dolby* Digital 
and t he DTS** Digital Surround System.
* Manufactured under license from 

Dolby Laboratories.
Dolby, and the double-D symbol are 
trademarks of Dol by Laboratories.

** Manufactured under license under 

U.S. Pat ent Nos:  5,956,674; 5,974,380; 
6,487,535 & other U.S. and worldwide 
patents issued & pending. DTS, the 
Symbol, & DTS and the Symbol 
together are registered trademarks & 
DTS Digital Surround and the DTS 
logos are trademarks of DTS, Inc. 
Product includes software. © DTS, Inc.
All Rights Reserved.

The BLUETOOTH

®

 word mark and logos 

are registered trademarks owned by 
Bluetooth SIG, Inc. and any use of such 
marks by Sony Corporation is under 
license.

This system incorporates High-Definition 
Multimedia Interface (HDMI™) 
technology. 
The terms HDMI and HDMI High-
Definition Multimedia Interface, and the 
HDMI Logo are trademarks or registered 
trademarks of HDMI Licensing LLC in the 
United States and other countries.

“x.v.Color”and “x.v.Color” logo are 
trade marks of Sony Corporation.

Copyrights

“WALKMAN” and “WALKMAN” logo are 
registered trademarks of Sony 
Corporation.

“PlayStation

®

” is a registered trademark 

of Sony Computer Entertainment Inc.
Other trademarks and trade names are 
those of their respective owners.

Summary of Contents for HT-CT260H











































Reviews: