Sony HKSR-9003, Operation Manual

Page: 80 / 177

Recording 80
Ch
apt
er 4
Re
c
o
rdin
g/
Pla
y
ba
c
k
To select the type of time data to display
Use the TIMER SEL item.
1
Turn the SELECT/ENTER dial to
select CTL, TC (timecode), or UBIT
(user bits).
CTL: Display CTL signals.
TC: Display timecode.
UBIT: Display user bit data.
2
Press the SELECT/ENTER dial.
To select timecode to record
You can select the following types of timecode.
a) Only when the HKSR-9001 is installed
To select user bits to record
You can select the following types of user bits.
Menu item Timecode
TCG
MODE REGENE
SOURCE
PRST – An arbitrary initial
timecode value can be
preset (R RUN/F RUN
and DF/NDF menu
items can be set to any
values).
RGN INT L Timecode in
synchronization with
the timecode recorded
in the longitudinal
direction on the tape.
EXT L Timecode in
synchronization with
the timecode input to
the TC IN connector.
AUX L
a) Timecode in
synchronization with
the LTC timecode of the
SDI signal input to the
AUX IN connector.
AUX V
a) Timecode in
synchronization with
the VITC timecode of
the SDI signal input to
the AUX IN connector.
Menu item User bits
OTHERS
(MAIN)
>RT REC TCG
SET
(MAIN)
>UGB
SOURCE TCG
MODE
OFF TCG PRST Arbitrary user bits
can be preset
(TIMER PRESET
>TCG UBIT).
RGN Regenerate the
user bits of the
timecode selected
with REGEN
SOURCE.
INT – Arbitrary user bits
can be preset,
regardless of the
setting of TCG
MODE (TIMER
PRESET >TCG
UBIT).
VITC – – Record real time in
the user bits of
VITC only (LTC
user bits follow the
setting of UGB
SOURCE).
V+L – – Record real time in
the user bits of
both VITC and
LTC.
LTC – – Record real time in
the user bits of
LTC only (VITC
user bits follow the
setting of UGB
SOURCE).
Menu item Timecode
TCG
MODE REGENE
SOURCE