Sony HKSR-9003 Operation Manual Download Page 128

Page: 128 / 177

VTR Menu Operations

128

Chap

Men

Con

fig

ion an

d D

iled

then press the MENU SEL/ENTER
dial.

To move a page

Proceed as follows:

Display the EDIT PAGE screen of the
USER MENU CUSTOMIZE menu.
Turn the MENU SEL/ENTER dial to
move the pointer to the page that you
wish to move.

The EDIT FUNCTION screen appears.

Select “MOVE,” and then press the
MENU SEL/ENTER dial.

The EDIT PAGE screen appears again.

Turn MENU SEL/ENTER dial to move
the pointer to the position to which you
wish to move the page selected in step 1.

Press the MENU SEL/ENTER dial.

The page selected in step

is moved to the

position selected in step

In the above example, <PB MIX SETTING>
moves to the “03” position, and the
<MARKER SETTING> and following
pages move down one line.

Use the <FILE PRESET> page of the FILE menu.

For details, see “Resetting to the Initial Settings”
(page 151).

The VTR menu of this unit contains three setup
menus.
• TC Setup menu

(page 130)

• AUDIO Setup menu

(page 133)

• SYSTEM Setup menu

(page 135)

To display menus

Press the menu button (TC, AUDIO, or
SYSTEM) corresponding to the menu that you
want to display.

To return to the HOME screen

Press the HOME button or repeatedly press the
BACK button.

Turn the SELECT/ENTER dial to
move the cursor to the target item.

Returning the USER Menu to the
Factory Defaults

VTR Menu Operations

Displaying VTR Menus

Changing Menu Settings

VIDEO button

HOME button

SELECT/ENTER dial

TC button

SYSTEM button

BACK button

AUDIO button

Summary of Contents for HKSR-9003


















































































































































































Search results

Summary of Contents for HKSR-9003

Reviews:

Related manuals for HKSR-9003

Brands by name

Popular brands

Sony HKSR-9003, Operation Manual

Search results

Summary of Contents for HKSR-9003

Reviews:

Related manuals for HKSR-9003

Brands by name

Popular brands