55
Error and Warning Display
Lock Function
The lock function disables operation of the jog roller, the
jog L and R buttons, the control knobs, and the touch
panel.
To set the lock function
Hold the function 1 button pressed until it lights in red.
“Lock” will then appear on the task bar.
Notes
• You can display the Option Menu and Status Menu even
if the Lock function is set.
• The Option Menu is operable even if the function 1
button is lit in red.
• The Lock function cannot be released on the Option
Menu and Status Menu.
• When the numeric key display is displayed, the lock
function cannot be set.
To release the lock function
Hold the function 1 button pressed until it goes out, and
the lock function is released.
Error and Warning
Display
If you touch the status area in error or warning status, one
of the following icons will appear. If you touch the status
area, an error or warning code is displayed.
(communication error):
A communication error
has been generated.
(warning):
A warning message is posted.
(error):
An error message is generated.
If a communication error has been generated, check the IP
address and the connections, and set the IP address
correctly.
For details on IP address setting, see “2. IP Address” on
page 51.
For details on the error and warning codes, refer to “6-1.
Error/Warning Code List” in the Installation Manual for
the HKSP-1125.
When you press the select L button (Back) or touch the
status area, the display of the error or warning code is
terminated, and the operation display appears.
