50
Operations
Cursor on the operation panel
A cursor displayed in list area moves only when you
select an item to be adjusted by using the jog roller or jog
L and R buttons are used. If you touch the button directly,
the cursor does not move.
Adjustment
You can adjust the values displayed in the adjusted value
display area with the control knob or directly enter the
values.
Adjusting using the control knob
Turn the control knob corresponding to the parameter to
be adjusted.
Displaying the Unity value
v
mark:
Unity position (shows the user default value)
Bar:
The bar appears in yellow when the Unity value and
the current setting are the same.
Adjusting using the numeric key display
1
Touch the adjusted value display area whose value is
to be adjusted.
The numeric key display appears.
2
Enter the value to be set, then press the Enter button.
To trim the set value, enter the value, then press the
Trim button.
The numeric key display disappears, and the entered
value is shown in the adjusted value display area.
To clear the entered value, press the Clear button before
pressing the Enter or Trim button.
To cancel the entered value
Press the Cancel button.
Retrieving the default values
Press the Unity button. The default values set by User
Save is retrieved.
Setting the Unit ID
The Unit ID displayed in the adjusted value display area
is set by entering the numeric value.
1
Press the Slot button in the list area.
The Unit ID appears in the adjusted value display
area.
2
Press Unit ID in the adjusted value display area.
The numeric keypad appears.
3
Enter the value to be set, then press the Connect
button.
The numeric keypad disappears, and the entered
value is shown in the adjusted value display area.
To clear the entered value, press the Clear button before
pressing the Connect button.
To cancel the entered value
Press the Cancel button.
To select a Unit ID that includes the
communication history
Press the Next Record button. The values following the
current setting appear in order. If the Unit ID with the
communication history has a unit name, that also appears.
Audio Sample
61
4095
1125
Current setting
Bar
v
mark
12
7
4
1
0
8
0 . . . 2
Frame
5
2
.
9
6
3
Cancel
–
Clear
Unity
Trim
Enter
1
7
4
1
0
8
1 _ 254
SELECT Unit ID Menu
Unit ID
Group ID 1
Unit Name SONY
5
2
9
6
3
Cancel
Clear
Next
Record
Connect
