27
Menu Operating Section
Cha
p
te
r 2
Loc
a
tio
ns
a
nd F
unc
tions
of
P
a
rts
a
nd Cont
rol
s
2-5 Menu Operating Section
a
“Memory Stick” compartment
Open the cover of the “Memory Stick” compartment by
pressing the MEMORY STICK OPEN button and insert
the “Memory Stick.”
To remove, press the eject button.
During data writing/loading to/from the “Memory Stick,”
the ACCESS indicator lights or flashes.
For details, see “6-1-1 Handling the “Memory Stick”” on
page 108.
b
MENU knob
Changes the page selection or a setting within the menu.
Push:
If you push this knob when the arrow (
b
) is placed
at the page title on the menu, the arrow changes to a
question mark (?) and you can change the page by
turning this knob.
When the arrow mark is placed at a position other than
the page title, you can change the setting of the current
item by pushing and turning this knob.
Turn:
Turn this knob to change the page or change item
settings.
c
STATUS ON/SEL / OFF (menu display on/page
selection/display off) switch
To enable this switch, set the MENU ON/OFF switch to
OFF.
Closing the switch cover automatically sets the MENU
ON/OFF switch to OFF.
ON/SEL:
Each time this switch is pushed upward, a
window to confirm the menu settings and status of the
camcorder appears on the viewfinder screen. The
window consists of three pages, which are switched
each time the switch is pushed upward. Each page is
displayed for about 10 seconds.
OFF:
To clear the page immediately after display, push
this switch down to the OFF position.
You can select the pages to be displayed on the menu.
For details, see “5-2-9 Displaying the Status Confirmation
Windows” on page 91.
d
MENU ON/OFF switch
To use this switch, open the switch cover.
This switch is used to display the menu on the viewfinder
screen or the test signal screen.
e
CANCEL/PRST / ESCAPE switch
b
MENU knob
c
STATUS ON/SEL / OFF switch
d
MENU ON/OFF switch
a
“Memory Stick” compartment
Switch cover
ACCESS indicator
MEMORY STICK OPEN button
Eject button
“Memory Stick”
f
