20
Audio Functions
Cha
p
te
r 2
Loc
a
tio
ns
a
nd F
unc
tions
of
P
a
rts
a
nd Cont
rol
s
f
MONITOR volume control
Adjusts the speaker or earphone volume for sounds other
than the alarm sound. At the minimum position, no sound
can be heard.
g
ALARM volume control
Adjusts the speaker or earphone alarm volume. At the
minimum position, no sound can be heard.
h
Built-in speaker
The speaker can be used to monitor E-E sound during
recording, and play back sound during playback. The
speaker also sounds alarms to reinforce visual warnings.
If you connect an earphone to the EARPHONE jack, the
speaker is automatically muted.
See “8-4 Operation Warnings” on page 139 for
information about alarms.
Audio functions (2)
i
LEVEL (CH-1/CH-2) (audio channel-1 and
channel-2 recording level) controls
Adjust the audio levels of channels 1 and 2 when the
AUDIO SELECT switches are set to MANUAL.
j
AUDIO SELECT (CH-1/CH-2) (audio channel-1
and channel-2 adjustment method selection) switches
Select the audio level adjustment method for each of audio
channels 1 and 2.
AUTO:
Select this setting for automatic adjustment.
MANUAL:
Select this setting for manual adjustment.
CH-1/2 /
CH-3/4 switch
position
MONITOR
switch
position
Audio output
CH-1/2
CH-1
Audio channel 1
MIX
Mix sound of channels 1 and 2
CH-2
Audio channel 2
CH-3/4
CH-3
Audio channel 3
MIX
Mix sound of channels 3 and 4
CH-4
Audio channel 4
Minimum
Maximum
i
LEVEL (CH-1/CH-2) controls
k
AUDIO IN CH-1/CH-2/CH-3/CH-4 switches
j
AUDIO SELECT (CH-1/CH-2) switches
m
LINE / AES/EBU / MIC selectors
o
AUDIO OUT connector
n
+48V/OFF switches
l
CUE IN switch
q
DC OUT 12V connector
p
AUDIO IN CH1/CH2 connectors
