Sony HDW-650, Operation Manual, Page: 131 / 177

Setting the Status Display on the Viewfinder Screen and the LCD Monitor 131
Chap
te
r
5
Men
u
Dis
pla
y
s
and
Det
a
iled Se
tt
ings
Switch the display of the center and safety zone
markers on or off, and select whether the area
indicated by the safety zone marker is 80%, 90%,
92.5%, or 95% of the screen area.
(How to select an item in the menu screen: Turn
the MENU knob to move
b to the desired item.)
1
Display the MARKER 1 or MARKER 2
page of the OPERATION menu on the
screen, and press the MENU knob.
For details on menu operations, see “Basic
menu operations” on page 117.
2
Select the desired item, and press the
MENU knob.
You can set the following items on the
MARKER 1 and MARKER 2 pages.
MARKER 1 page
a) The ASPECT MASK setting affects the
viewfinder and LCD monitor display. In the
following cases, it also affects the VBS signal or
the HD/SD SDI signal.
• When HD/SD SDI OUT on the OUTPUT 1
page is set to HDSDI or SDSDI, and HD/SD
SDI SUPER is to ON, and SUPER
(MARKER) on the SUPERIMPOSE page is
set to ON
• When TEST OUT SELECT on the OUTPUT 1
page is set to VBS, and TEST OUT SUPER is
set to ON, and SUPER (MARKER) on the
SUPERIMPOSE page is set to ON
MARKER 2 page
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
You can make settings for viewfinder screen
display functions.
(How to select an item in the menu screen: Turn
the MENU knob to move
b
to the desired item.)
1
Display the VF SETTING page of the
OPERATION menu on the screen, and
press the MENU knob.
For details on menu operations, see “Basic
menu operations” on page 117.
2
Select the desired item, and press the
MENU knob.
Setting the marker display
Item Description
MARKER To hide all markers, set to
OFF.
CENTER To display the center marker,
set to ON.
CENTER
MARK Selects the position of the
center marker.
SAFETY
ZONE To display the safety zone, set
to ON.
SAFETY
AREA Selects the safety zone range
(80%, 90%, 92.5% or 95%).
ASPECT To display the aspect marker,
set to ON.
ASPECT
SELECT Selects the aspect mode (15:9/
14:9/13:9/4:3/1.85/2.35).
ASPECT
MASK
a)
To make the areas out of the
selected aspect marker
dimmer, set to ON.
ASPECT
MASK LVL To set the mask level, when
the ASPECT MASK is set to
ON.
100 %
MARKER To display the effective pixel
area, set to ON.
Item Description
USER BOX Turns the display of the box
cursor on and off.
USER BOX
WIDTH Sets the width of the box
cursor (distance from center
to left or right edge).
USER BOX
HEIGHT Sets the height of the box
cursor (distance from center
to top or bottom edge).
USER BOX H
POS Sets the horizontal position of
the center of the box cursor.
USER BOX V
POS Sets the vertical position of
the center of the box cursor.
CENTER H
POS Sets the horizontal position of
the center marker.
CENTER V
POS Sets the vertical position of
the center marker.
ASPECT
SAFE ZONE Turns the display of the aspect
safety zone on and off.
ASPECT
SAFE AREA Selects the range of the aspect
safety zone (80%/90%/
92.5%/95%).
Setting the viewfinder