79
9-3 Items in the Basic Setup Menu
Chapt
er 9 Set
u
p
Men
u
s
009
c)
CHARACTER TYPE
Determine the type of characters such as timecode output from the COMPOSITE
VIDEO OUTPUT 3 (SUPER) connector, SDI OUTPUT 3 (SUPER) connector, or
HDSDI OUTPUT 3 (SUPER) connector for superimposed display on the monitor.
WHITE:
White letters on a black background
BLACK:
Black letters on a white background
W/OUT:
White letters with black outline
B/OUT:
Black letters with white outline
011
c)
CHARACTER V-SIZE
Determine the vertical size of characters such as timecode output from the
COMPOSITE VIDEO OUTPUT 3 (SUPER) connector, SDI OUTPUT 3 (SUPER)
connector, or HDSDI OUTPUT 3 (SUPER) connector for superimposed display on
the monitor.
x1:
Standard size
x2:
2 times the standard size
013
SYSTEM FREQUENCY
SELECT
Determine whether to enable switching of the system frequency among 59.94i,
50i, 29.97PsF, 25PsF, 24PsF and 23.98PsF.
OFF:
Disable switching.
ON:
Enable switching.
When “ON” is selected, the menu display changes to allow switching of the
setting among 59.94i, 50i, 29.97PsF, 25PsF, 24PsF and 23.98PsF.
For the procedure for switching the system frequency, see page 76.
Note
For the basic and extended setup menus, settings are saved for 59.94i, 29.97PsF,
23.98PsF mode and the other for 50i, 25PsF, 24PsF modes separately. When you
switch systems, all menu items change to the current menu values of the selected
mode. (These are different from the settings for the mode before switching.)
018
ACTIVE LINE SELECT
(enabled only when the
optional HKDW-104 board
is installed, and disabled in
24PsF, 23.98PsF, 24PD,
and 23.98PD2 mode)
Determine whether to enable switching of the number of active lines for HDSDI
outputs (OFF TAPE/720P).
OFF:
Disable switching.
ON:
Enable switching.
When “ON” is selected, the menu display changes to enable switching between
OFF TAPE and 720P.For details on the procedure for switching the ACTIVE LINE,
see “To switch the line conversion function (menu item 018)” (page 76).
023
LOCAL KEY MAP
When “MAP” is selected in setup menu item 006 and the unit is controlled from
another device, you can select the operable buttons on the control panel from the
following sub-items.
The settings of each sub-item are as follows.
DIS:
Disable the buttons.
ENA:
Enable the buttons.
Sub-item
1
STOP
Select whether to enable or disable the STOP button.
2
PLAY
Select whether to enable or disable the PLAY button.
3
REC
Select whether to enable or disable the REC button.
4
STANDBY
Select whether to enable or disable the STANDBY button.
5
EJECT
Select whether to enable or disable the EJECT button.
6
JOG
Select whether to enable or disable the JOG button.
7
SHUTTLE
Select whether to enable or disable the SHUTTLE button.
8
VAR
Select whether to enable or disable the VAR button
9
FF/REW
Select whether to enable or disable the F FWD and REW buttons.
10
F-KEY
Select whether to enable or disable the function selection buttons (F1 to F10) and
audio level control knobs.
11
P-KEY/DISPLAY
Select whether to enable or disable the menu page selection buttons (P1 to P5)
and DISPLAY button.
Item number
Item name
Settings
