background image

54

Outputting Timecode

  Cha

p

te

r 4  

Using

 Time Dat

a

Outputting Timecode

This section describes the timecode output from the TC 
OUT, VIDEO OUT and SDI OUT1/OUT2 connectors 
during playback and recording, and in E-E mode.

Timecode Output During Playback

Timecode output from the TC OUT connector 
(LTC)

The timecode (and user bit data) read from the tape being 
played is output from the TC OUT connector.

With the factory default setting, the timecode is not output 
during search. To output timecode also during search, set 
the TIME CODE >MUTING IN SRCH menu item to OFF.

• Even if the MUTING IN SRCH menu item is set to OFF, 

when the timecode cannot be read from the tape during 
search, no timecode is output.

• During still image playback, no timecode is output.
• During variable speed playback, the timecode output 

follows the setting of the MUTING IN SRCH menu item 

(see page 79)

.

Timecode output from the video signal output 
connectors (VITC)

With the TIME CODE menu item, you can select whether 
to insert timecode (VITC) in the video signal output from 
the VIDEO OUT, SDI OUT1/OUT2 connectors.
Set the TIME CODE menu item as shown in next step.

For details of menu operations, see “Changing Menu 
Settings” (page 86)
.

To output VITC

1

Set the VITC OUTPUT menu item 

(see page 78)

 to 

TC or VITC.

TC:

 Convert the timecode (LTC) to VITC, and insert 

in the output video signal.

VITC: 

Output the VITC inserted in the video signal.

If no VITC is to be inserted in the output video signal, 
select OFF.

2

With the VITC POS SEL-1 and VITC POS SEL-2 
menu items 

(see page 78)

, specify the lines in which to 

insert the VITC.

Embedded timecode in SDI output

With an appropriate menu setting, this unit can also output 
SDI embedded timecode as LTC in the SDI output, 
compliant with the RP188 standard.

Embedded timecode in HD-SDI output

The HD-SDI output from this unit includes HDV timecode 
as both LTC and VITC compliant with the ARIB STD-
B4.2.0 standard.

Timecode Output During Recording 
and in E-E Mode

Timecode output from the TC OUT connector

Timecode (and user bit data) is output according to the 
settings described in 

“Recording Timecode and User Bit 

Data”

 

(see page 51)

.

During timecode recording and STOP REC (forced E-E 
mode) you can adjust the timecode phase of the LTC signal 
output from the TC OUT connector. (For details, see the 
description of the EE OUT PHASE menu item 

(see 

page 78)

.)

Timecode output from the video signal output 
connectors

This is the same as described in “Timecode Output During 
Playback.”

Notes

Summary of Contents for HDV HVR-1500
















































































































Reviews: