9
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
CLOCK/ LANG
(Items to set clock and language)
The default settings are marked with
.
CLOCK SET
See page 21.
AREA SET
You can adjust a time difference without stopping the clock. Set your local area when using
your camcorder in other time zones. Refer to the world time difference on page 121.
Steps
(HOME)
(SETTINGS)
[CLOCK/ LANG]
[AREA SET]
set your local area
using /
AUTO CLOCK ADJ (HDR-XR200VE)
Your camcorder will maintain the correct clock time by acquiring the time from GPS.
Set the GPS switch to ON in advance.
Steps
(HOME)
(SETTINGS)
[CLOCK/ LANG]
[AUTO CLOCK ADJ]
a desired
setting
ON
Adjusts the clock automatically.
OFF
Does not adjust the clock automatically.
Notes
You must set the date and time on your camcorder before using your camcorder (p. 21).
There may be discrepancies of a few seconds even if [AUTO CLOCK ADJ] is activated.
The clock is adjusted automatically by [AUTO CLOCK ADJ] when you turn off your camcorder if the
camcorder is receiving a GPS signal while it is being used. The clock is not adjusted until the camcorder
is turned off. Also, the clock is not adjusted unless the camcorder is receiving a GPS signal, even if the
GPS switch is set to ON.
AUTO AREA ADJ (HDR-XR200VE)
Your camcorder will compensate for a time differences with the current area automatically
when it detects a time difference, by acquiring the current area information from GPS.
Set the GPS switch to ON in advance.
Steps
(HOME)
(SETTINGS)
[CLOCK/ LANG]
[AUTO AREA ADJ]
a desired
setting
