US
G
etting star
ted
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
Select
[Setup]
[
General Settings]
[Language Setting]
a desired language.
To turn off the power
Close the LCD screen.
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (
), and then adjust the angle
(
).
To turn off the beep sound
Select
[Setup]
[
General Settings]
[
Beep
]
[Off].
Notes
The recording date, time and condition are recorded automatically on the recording media. They are not
displayed during recording. However, you can check them as [Data Code] during playback. To display
them, select
[Setup]
[
Playback Settings]
[Data Code]
[Date/Time].
To set the date and time again: [Date & Time Setting] (p. 63)
To calibrate the touch panel: [Calibration] (HDR-CX200/CX210/PJ200/PJ210) (p. 72)
90 degrees to the camcorder
90 degrees (max.)
180 degrees (max.)