Ta
bl
e o
f
co
nte
n
ts
O
per
a
tion
S
ear
ch
Se
ttin
g
s
Se
ar
ch
Inde
x
32
US
The Adhesive Mount is used for fixing the Waterproof Case to an item you intend to use. The
Adhesive Mount is a general term for the Attachment Buckle, Flat Adhesive Mount, and Curved
Adhesive Mount. Insert the camera in the Waterproof Case before attaching.
Attachment method
1
Align the tripod screw hole in the bottom of
the Waterproof Case with the tripod screw
hole of the Attachment Buckle, and fix firmly
with the tripod screw.
• Confirm that the assembly is fixed securely.
2
Attach the Attachment Buckle (with the
Waterproof Case set in step 1) to the Flat
Adhesive Mount or Curved Adhesive Mount by
sliding it until it clicks into place.
3
Remove dust, moisture and oily substances
completely from the surface where the adhesive
mount is to be attached.
4
Peel off the release paper on the back, and fix the Adhesive Mount in the
desired location.
• Adhesive power reaches its maximum strength 24 hours after the Adhesive Mount is attached to the
desired location.
Adhesive Mount (VCT-AM1)
Attachment Buckle
Flat Adhesive Mount
Curved Adhesive Mount
Tripod
screw
Positioning pin
z
To attach to or detach from the Attachment Buckle
Press and hold the circled part to unlock, then slide it
in the opposite direction of step 2.
Continued
r
