20
Copying data to the HDD Photo Storage
This section explains how to use the COPY button on the unit to copy data
from a “Memory Stick” or CompactFlash card to the internal hard disk of the
unit.
Hint
For information on how to connect the unit to a computer to copy, see “Connecting to a
computer” (page 23).
Notes
•
The data read/write speed depends on the combination of “Memory Stick” and equipment.
•
Data from a “Memory Stick” that has the access control attribute set on another device
cannot be read or copied on the unit. To enable reading and copying of such data, you must
first disable the access control on the other device.
•
MagicGate-compatible data can be copied but not played back with the unit. Once
MagicGate-compatible data is copied to the unit, it cannot be copied back to the “Memory
Stick”, either.
1
Turn on the unit.
Push and slide the
?/1
(power) switch in the direction of the arrow. Hold
the
?/1
(power) switch until the
1
e
(power) indicator lights up.
Hint
The color of the
1
e
(power) indicator differs, according to the remaining charge of
the internal battery. For details, see “About the battery capacity” (page 14).
2
Insert the “Memory Stick” or CompactFlash card into the unit
(page 16, page 18).
The media indicator, the
(hard disk) indicator, and the COPY button
light green.
Example: When a “Memory Stick” is inserted
Hold down and slide in the
direction of the arrow
Summary of Contents for HDPS-M1
Page 46: ......
