manualshive.com logo in svg

Sony HDCAM HDW-F900, Operation Manual

Share
Download
Sony HDCAM HDW-F900 Operation Manual Download Page 66

3

Chapter 3  Recording and Playback

3-5

2

4

1

3

•

•

•
• 
•

•

•

•

•

•

•

•

•

•
• 
•

•

•

•

•

•

•

3-2 Recording

3-2-1 Basic Procedure

This section describes the basic procedure for shooting and recording.
Before a shooting session, ensure that the camcorder is functioning
properly.

For more information, see Section 6-1 “Testing the Camcorder Before Shooting”
(page 6-1).

Turning on the camcorder and loading a cassette

Follow the procedure below.

Basic procedure for shooting : from power supply to cassette loading

1

Attach a fully charged battery pack.

For details, see “5-1 Power Supply” on page 5-1.

2

Set the POWER switch to ON.  Check that the HUMID indicator
does not appear and that the BATT indicator shows at least five
segments.
• If HUMID indicator appears, wait until it disappears.
• If the BATT indicator does not show at least five segments,

replace the battery pack with a fully charged one.

(Continued)

Summary of Contents for HDCAM HDW-F900






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands