23
To return to the TOP MENU screen
Align the arrow marker (
,
) with “TOP” at the top right of the
menu page then press the MENU SEL knob/ENTER button.
The TOP MENU screen is resumed.
Setting the Menu Items
If a “
?
” mark is flashing at the left of the page number, push on
the MENU SEL knob/ENTER button to change it to the arrow
marker (
,
). Setting on the displayed page is enabled.
1
Rotate the MENU SEL knob/ENTER button to align the
arrow marker (
,
) with the desired item.
2
Push on the MENU SEL knob/ENTER button.
The arrow marker (
,
) will change to a flashing “
?
” mark.
3
Rotate the MENU SEL knob/ENTER button to change
the setting value.
When the knob is rotated quickly, the values will change
quickly; when rotated slowly, the values will change
slowly.
To reset a changed value
If you press the STATUS/CANCEL switch toward
CANCEL before pressing the MENU SEL knob/ENTER
button, the setting will be returned to its previous value.
To interrupt settings
Set the DISPLAY switch to OFF to turn off the menu
screen display.
The setting operation can be restarted by setting the
DISPLAY switch back to MENU.
4
Push on the MENU SEL knob/ENTER button.
The “
?
” mark will change back to the arrow marker (
,
),
and the new setting will be registered.
5
To change other setting items on the same menu
page, repeat steps 1 through 4.
To specify a character string
When you press the MENU SEL knob/ENTER button with the
arrow marker (
,
) pointing to an item for which a character
string, such as a file ID, is to be specified, a cursor and the list
of selectable characters are displayed.
The displayed cursor can be moved by rotating the MENU
SEL knob/ENTER button.
1
Set the cursor to the position where you wish enter a
character, then push on the MENU SEL knob/ENTER
button.
Another cursor appears on the character list.
2
Set the cursor to the character to be entered and push
on the MENU SEL knob/ENTER button.
Repeat steps
1
and
2
.
By selecting INS on the line below the character list, you
can enter a space at the cursor position.
Selecting DEL deletes the character at the cursor
position.
You can return to step
1
without changing the character by
selecting RET.
If you enter the permitted maximum number of characters
(up to the stop mark at the right end of the line), the cursor
moves to ESC on the line below the character list.
To register the new string you have set, select END and
push on the MENU SEL knob/ENTER button.
To restore the previous string, select ESC and push on
the MENU SEL knob/ENTER button.
To return a menu item to its standard value
Select the menu item to be returned to its standard value then
hold the MENU SEL knob/ENTER button pressed for 3
seconds while the arrow marker (
,
) is displayed.
If “10 SEC CLEAR” has been set to ON on the <FILE CLEAR>
page of the FILE menu, you can return the setting in the
reference file for the item being selected to the factory-set
value by holding the MENU SEL knob/ENTER button pressed
for another 10 seconds.
To end menu operations
Set the DISPLAY switch to OFF.
Editing the USER Menu
You can select desired pages and items from the
OPERATION, PAINT, MAINTENANCE, FILE, and
DIAGNOSIS menus and register them to the USER menu.
If you specify pages or items frequently used for the USER
menu, you can easily call and use them.
The following pages are included on the factory-set USER
menu:
<VF DETAIL> 04 TOP
VF DETAIL : ON 25%
CRISP : 0
FREQUENCY: 9M
FLICKER : OFF
AREA : 70%
ZOOM LINK: ON 100%
COLOR DETAIL : ON BLUE
PEAK COLOR : ON
CHROMA LEVEL: 100%
Menu page title
USER
menu
No.
Source menu / page No.
<VF OUT>
U01
OPERATION
12
<VF DETAIL>
U02
OPERATION
04
<FOCUS ASSIST>
U03
OPERATION
07
<VF DISPLAY>
U04
OPERATION
01
<‘!’ IND>
U05
OPERATION
02
<VF MARKER>
U06
OPERATION
03
<CURSOR>
U07
OPERATION
09
<ZEBRA>
U08
OPERATION
08
<SWITCH ASSIGN1>
U09
OPERATION
13
<SWITCH ASSIGN2>
U10
OPERATION
14
<HEADSET MIC>
U11
OPERATION
18
<OUTPUT FORMAT>
U12
MAINTENANCE
M11
<TEST OUT>
U13
MAINTENANCE
M12
<SDI OUT>
U14
MAINTENANCE
M13
<ROM VERSION>
U15
DIAGNOSIS
D03
