Sony HDC1400, Operation Manual

Page: 17 / 65

72
Locations and Functions of Parts
Operation panel
SY type:
For UC/SYL/JN3 (USA, Canada, and other countries) and JN4 (East Asia) models (for NTSC areas)
For details on the differences among models, see “Overview” on page 60.
a
INTERCOM1 and INTERCOM2 controls and
switches
There are PGM1 and 2 controls incorporated with a line
select switch, a LEVEL/MIC switch, and INCOM level
control each for intercom line 1 and 2.
PGM1 (program 1) control
Adjust the audio reception level of program 1.
PGM2 (program 2) control
Adjust the audio reception level of program 2.
LEVEL/MIC switch
REAR/ON:
The intercom headset microphone is turned
on. The intercom audio reception level is adjusted with
the INCOM level control.
REAR/OFF: The intercom headset microphone is turned
off. The intercom audio reception level is adjusted with
the INCOM level control.
FRONT/OFF: The intercom headset microphone is
turned off. The intercom audio reception level is
adjusted with the INTERCOM LEVEL control on the
front of the camera.
INCOM level control
Adjust the intercom audio reception level.
Line select switch
Select the intercom line.
PROD: Producer line
ENG: Engineer line
b
RET 1 (return video 1) button and select switch
The return video signal selected with the switch is
displayed on the viewfinder screen while the button is
pressed.
c
RET 2 (return video 2) button and select switch
When other return video systems are used in addition to
return video 1, you can monitor the signal selected with the
switch on the viewfinder screen while pressing the button.
The RET 1 button has priority over the RET 2 button if
both buttons are pressed.
d
LIGHT switch
Set to ON to illuminate the operation panel.
RET1
PGM1 PGM2
1
2 3
4
RET2
1
2 3
4
LIGHT
INCOM
INTERCOM 1
ON
OFF
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF ENG
PGM1 PGM2
INCOM
INTERCOM 2
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF ENG
PGM1 PGM2
INCOM
INTERCOM 1
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF ENG
PGM1 PGM2
INCOM
INTERCOM 2
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF ENG
b
RET 1 button and select switch
c
RET 2 button and select switch
d
LIGHT switch
a
INTERCOM1 and INTERCOM2 controls and switches
PGM1 control
PGM2 control
INCOM level control
Line select switch
LEVEL/MIC switch
Note