Sony HDC1400 Operation Manual Download

Page: 12 / 65

Locations and Functions of Parts

Locations and Functions of Parts

Accessory Attachments

VF (viewfinder) connector (20-pin)

Connect the cable of the viewfinder (not supplied).

Shoulder strap fitting post

Attach one end of a shoulder strap (not supplied) to this
fitting post, and the other end to the fitting post on the other
side of the camera.

Viewfinder front-rear positioning lever and LOCK
knob

Loosen the lever and knob to adjust the viewfinder position
towards the front or rear.

Viewfinder left-right positioning ring

Loosen this ring to adjust the viewfinder position towards
the left or right.

For details on adjusting the viewfinder position, see
“Attaching a Viewfinder” on page 76.

Lens cable clamp

Used to secure the cable of the lens (not supplied).

Lens fixing lever

Used to secure the lens in the lens mount.

Lens mount cap

Cover the lens mount with this cap when a lens is not
attached. The cover may be removed by moving the lens
fixing lever upwards.

Lens mount

Used to attach a lens (not supplied).

LENS connector (12-pin)

Connect the lens cable. The camera can control the lens
functions through this cable.

Shoulder pad

Shoulder strap fitting post

VF connector

Viewfinder front-rear positioning
lever and lock knob

Viewfinder left-right positioning
ring

Lens cable clamp

Lens fixing lever

Lens mount cap

Lens mount

LENS connector

Tripod mount (bottom)

Summary of Contents for HDC1400


































































Search results

Summary of Contents for HDC1400

Reviews:

Related manuals for HDC1400

Brands by name

Popular brands

Sony HDC1400, Operation Manual

Search results

Summary of Contents for HDC1400

Reviews:

Related manuals for HDC1400

Brands by name

Popular brands