![background image](http://html.mh-extra.com/html/sony/hdc-3300r/hdc-3300r_operation-manual_400103012.webp)
12
Locations and Functions of Parts
Operation panel
SY type:
For JN4 (East Asia) and SYL (USA, Canada, and other countries) models (for NTSC areas)
a
INTERCOM 1 and INTERCOM 2 controls and
switches
There are PGM1 and 2 controls incorporated with a line
select switch, a LEVEL/MIC switch, and INCOM level
control each for intercom line 1 and 2.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
LEVEL/MIC switch
REAR/ON:
The intercom headset microphone is turned
on. The intercom audio listening level is adjusted with
the INCOM level control.
REAR/OFF:
The intercom headset microphone is turned
off. The intercom audio listening level is adjusted with
the INCOM level control.
FRONT/OFF:
The intercom headset microphone is
turned off. The intercom audio listening level is
adjusted with the INCOM level control and the
INTERCOM LEVEL control on the front of the camera
.
INCOM level control
Adjust the intercom audio listening level.
Line select switch
Select the intercom line.
PROD:
Producer line
ENG:
Engineer line
b
RET1 (return video 1) button and select switch
The return video signal selected with the switch is
displayed on the viewfinder screen while the button is
pressed.
c
RET2 (return video 2) button and select switch
When other return video systems are used in addition to
return video 1, you can monitor the signal selected with the
switch on the viewfinder screen while pressing the button.
The RET1 button has priority over the RET 2 button if both
buttons are pressed.
d
LIGHT switch
Set to ON to illuminate the operation panel.
RET1
PGM1
PGM2
1
2
3
4
RET2
1
2
3
4
LIGHT
INCOM
INTERCOM 1
ON
OFF
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF
ENG
PGM1
PGM2
INCOM
INTERCOM 2
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF
ENG
PGM1
PGM2
INCOM
INTERCOM 1
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF
ENG
PGM1
PGM2
INCOM
INTERCOM 2
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF
ENG
b
RET1 button and select switch
c
RET2 button and select switch
d
LIGHT switch
a
INTERCOM1 and INTERCOM2 controls and switches
PGM1 control
PGM2 control
INCOM level control
Line select switch
LEVEL/MIC switch
Note