![background image](http://html.mh-extra.com/html/sony/hdc-3300r/hdc-3300r_operation-manual_400103011.webp)
11
Locations and Functions of Parts
Rear
a
CAMERA POWER switch
CCU:
Power supply will be received from the camera
control unit.
OFF:
Power supply to the camera is shut down.
EXT:
Power supply will be received through the DC IN
connector.
b
Tally lamp and switch
ON:
The tally lamp lights when a tally signal is input to the
connected camera control unit or a call signal is
generated in response to pressing of a CALL button.
OFF:
The tally lamp is prevented from lighting.
c
CCU (Camera Control Unit) connector (optical/
electrical multi-connector)
Connect a camera control unit using an optical electro-
composite cable.
d
PROMPTER 2 connector (BNC type)
For output of a prompter 2 signal from the CCU.
e
CALL button
When you press this button, the red tally lamp of the RCP-
1000-series Remote Control Panel or the MSU-1000-
series Master Setup Unit, will light. Use to call the operator
of the RCP or MSU.
a
CAMERA POWER switch
Shoulder strap fitting post (
page 7
)
c
CCU connector
d
PROMPTER 2 connector
e
CALL button
Operation panel (
page 12
or
Connector panel (
page 14
)
b
Tally lamp and switch
Not used