SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
US Model
Canadian Model
HCD-SBT100
AEP Model
HCD-SBT100/SBT100B/
SBT300W/SBT300WB
UK Model
HCD-SBT100B/SBT300WB
Australian Model
HCD-SBT100/SBT300W/SBT300WB
• HCD-SBT100 is the compact disc receiver in CMT-SBT100.
• HCD-SBT100B is the compact disc receiver in CMT-SBT100B.
• HCD-SBT300W is the compact disc receiver in CMT-SBT300W.
• HCD-SBT300WB is the compact disc receiver in CMT-SBT300WB.
SPECIFICATIONS
COMPACT DISC RECEIVER
9-893-759-01
2013F33-1
©
2013.06
Ver. 1.0 2013.06
Model Name Using Similar Mechanism
NEW
CD Mechanism Type
CDM90-DVBU202
Optical Pick-up Block Name
CMS-S76RFS7G
Amplifier section (Other models)
Power output (rated):
HCD-SBT100/SBT100B:
HCD-SBT100/SBT100B:
HCD-SBT300W/SBT300WB:
20 watts + 20 watts (at 6 ohms, 1 kHz, 1% THD)
HCD-SBT300W/SBT300WB:
25 watts + 25 watts (at 6 ohms, 1 kHz, 1% THD)
RMS power output (reference):
50 watts + 50 watts (per channel at 6 ohms,
1 kHz)
25 watts + 25 watts (per channel at 6 ohms,
1 kHz)
Inputs/Outputs
AUDIO IN:
AUDIO IN (external input) jack:
Stereo mini jack, sensitivity 700 mV,
impedance 47 kilohms
(headphone) jack:
Stereo mini jack, 8 ohms or more
USB:
Supported bit rate:
MP3 (MPEG 1 Audio Layer-3): 32 kbps - 320
kbps, VBR
WMA: 48 kbps - 192 kbps, VBR
AAC: 48 kbps -320 kbps
Sampling frequencies:
MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
USB port:
Type A, 5 V DC 2.1 A
CD-DA/MP3 player section
System:
Compact disc and digital audio system
Laser Diode Properties:
Emission Duration: Continuous
Laser Output*: Less than 44.6 μW
* This output is the value measurement at a
distance of 200mm from the objective lens
surface on the Optical Pick-up Block with 7mm
aperture.
Frequency response:
50 Hz – 20 kHz
DAB/DAB+ frequency table (Band-III):
* Frequencies are displayed to two decimal
places on this system.
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 3.0
Output:
BLUETOOTH Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m
*1
Frequency band:
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method:
FHSS
Compatible BLUETOOTH profiles
*2
:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported content protection method
SCMS-T method
Transmission bandwidth
20 Hz – 20,000 Hz (with 44.1 kHz sampling)
*
1
such as obstacles between devices, magnetic
fields around a microwave oven, static
electricity, reception sensitivity, antenna’s
performance, operating system, software
application, etc.
*
2
BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.
Network section
(HCD-SBT300/SBT300WB only)
LAN port:
RJ-45
10BASE-T/100BASE-TX
(The communication speed may vary
depending on the communication
environment. This system does not
Frequency
Label
174.928 MHz
5A
176.640 MHz
5B
178.352 MHz
5C
180.064 MHz
5D
181.936 MHz
6A
183.648 MHz
6B
185.360 MHz
6C
187.072 MHz
6D
188.928 MHz
7A
190.640 MHz
7B
192.352 MHz
7C
194.064 MHz
7D
195.936 MHz
8A
197.648 MHz
8B
199.360 MHz
8C
201.072 MHz
8D
202.928 MHz
9A
204.640 MHz
9B
206.352 MHz
9C
208.064 MHz
9D
209.936 MHz
10A
211.648 MHz
10B
213.360 MHz
10C
215.072 MHz
10D
216.928 MHz
11A
218.640 MHz
11B
220.352 MHz
11C
222.064 MHz
11D
223.936 MHz
12A
225.648 MHz
12B
227.360 MHz
12C
229.072 MHz
12D
230.784 MHz
13A
232.496 MHz
13B
234.208 MHz
13C
235.776 MHz
13D
237.488 MHz
13E
239.200 MHz
13F
guarantee the communication speed and
quality of 10BASE-T/100BASE-TX.)
Wireless LAN:
Compatible standards:
IEEE 802.11 b/g (WEP 64 bit, WEP 128 bit)
Frequency band 2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Available channels ch1 to ch13
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
General
Power requirements:
AC 120 V, 60 Hz
Power consumption:
35 watts (HCD-SBT100/SBT100B)
36 watts (HCD-SBT300W/SBT300WB)
Dimensions (W/H/D) (incl. projecting parts,
excluding speakers):
Approx. 290 mm × 106 mm × 221 mm
Mass (excluding speakers):
Approx. 2.7 kg
Design and specifications are subject to
change without notice.
Standby power consumption: 0.5 W
Amplifier section (North American model)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(The United States model only)
With 6 ohm loads, both channels driven, from
120 - 10,000 Hz; rated 20 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated output.
Power output (rated): 20 watts + 20 watts
(at 6 ohms, 1 kHz, 1% THD)
(per channel at 6 ohms, 1 kHz)
RMS power output (reference): 25 watts + 25 watts
North American model:
AC 220 V - 240 V, 50 Hz/60 Hz
Other models:
Signal-to-noise ratio:
More than 90 dB
Dynamic range:
More than 90 dB
Tuner section
AM tuner section
(HCD-SBT100/SBT300W only):
Tuning range:
European models:
North American model:
531 kHz – 1,602 kHz (with 9 kHz tuning
interval)
Other models:
530 kHz – 1,710 kHz (with 10 kHz tuning
interval)
531 kHz – 1,710 kHz (with 9 kHz tuning
interval)
Antenna:
AM loop antenna
Intermediate frequency:
400 kHz
FM tuner section:
FM stereo, FM superheterodyne tuner
Tuning range:
87.5 MHz – 108.0 MHz (100 kHz step)
Other models:
Tuning range:
87.5 MHz – 108.0 MHz (50 kHz step)
Antenna:
FM lead antenna
DAB/DAB+ tuner section
(HCD-SBT100B/SBT300WB only):
FM stereo, DAB/FM superheterodyne tuner
Frequency range:
Band-III:
174.928 (5A) MHz – 239.200 (13F) MHz*
Antenna:
DAB/FM lead antenna:
* For details, see “DAB/DAB+ frequency table”
below.
The DAB/DAB+ services are available only in
countries/regions that support DAB/DAB+
services.
The actual range will vary depending on factors
HCD-SBT100/SBT100B/
SBT300W/SBT300WB
Photo: HCD-SBT300WB
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.
