10
TOP COVER HS ASS’Y, BOTTOM COVER MF ASS’Y, F PANEL ASS’Y R237
5
F panel ass’y R237
3
two screws
(P2.6
×
5)
3
four screws
(P2.6
×
5)
1
two screws
(P2.6
×
3)
4
Remove bottom cover
MF ass’y in the direction
of arrow
B
.
B
2
Remove top cover HS ass’y
in the direction of arrow
A
.
A
Mecha UD Sub SL
Emergency Gear SL
(Fig. B.1)
(Fig. B.2)
Note: 1. Before reassembling F Panel Ass’y R237
be sure that the end of the Mecha UD Sub
Cam SL on the right front does not protrude
as shown in (Fig. B.1). If it protrudes, move
it backward as follows:
1) Carefully remove the left side adhesive
label (Dust Seal EMA SL) on the left side
of the unit. refer to (Fig. B.2)
2) Turn the Emergency Gear SL with your
finger tip in the direction of the arrow
until the end of the Mecha UD Sub Cam
SL is drawn inside the unit. (See Fig. B.2).
When turning the Gear, DO NOT use
nail
as the gear tooth can be broken.
3) Reattach the adhesive label (Dust Seal EMA
SL).
Note: 2. Be sure that the claws of F Panel Ass’y R237 are
securely inserted into each holes in Top Cover HS
Ass’y and Bottom Cover MF ass’y.
Summary of Contents for HCD-LS1 - Compact Hi-fi Stereo System
Page 20: ...20 MEMO ...
