53
HCD-HPX9
[MC COLD RESET]
The cold reset clears all data including preset data stored in the
memory to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. In the standby status, press the
@/1
button to turn the power
on.
2. Press three buttons of
@/1
,
x
, and
[PLAY MODE/TUNING
MODE]
simultaneously.
3. The set is reset, and become standby status.
[COMMON TEST MODE]
Enter The Common Test Mode
Procedure:
1. In the standby status, press the
@/1
button to turn the power
on.
2. Press three buttons of
[PLAY MODE/TUNING MODE]
,
x
, and
[DSGX]
simultaneously.
3. When the common test mode is activated, “SLEEP” and
“PLAY” icons are blink and “MD” display on the fluorescent
indicator tube.
AMP Test
Procedure:
1. In the common test mode, if turn the
[VOLUME]
knob
clockwise, it displays “VOL MAX”, and if turn the knob
counterclockwise, it displays “VOL MIN”.
The same operations as described above can also be performed
by pressing the
[]
and
[VOLUME --]
buttons of the
remote control.
2. If the
[EQ]
button of the remote control is pressed, “TONE
MAX” is displayed for several seconds.
Pressing the
[EQ]
button once more displays the “TONE MIN”,
and another pressing displays “TONE FLAT".
3. “TONE MAX”, “TONE MIN”, and “TONE FLAT” are
displayed repeatedly in this order each time the
[EQ]
button is
pressed.
4. To release from this mode, press the
@/1
button to turn the
power off.
Tape Test
Procedure:
1. In the common test mode, insert a tape.
2. Input any audio signal from the
[MD/VIDEO]
jack (J301) on
N
TAPE button to
REC button again to start recording.
ML
button, the tape is returned to recording start point by cue or
review operation, and starts playback.
6. To release from this mode, press the
@/1
button to turn the
[PANEL TEST MODE]
Enter The Panel Test Mode
Procedure:
1. In the standby status, press the I/1 button to turn the power
on.
2. Press three buttons of
[REPEAT/FM MODE]
,
x
, and
[DSGX]
simultaneously.
3. When the panel test mode is activated, LEDs and segments of
fluorescent indicator tube are all turned on.
Version Check
Procedure:
1. In the panel test mode (all LEDs and segments of fluorescent
indicator tube are turned on), press the
[REPEAT/FM MODE]
button.
2. Destination indication and model type indication are displayed
on the fluorescent indicator tube alternately.
3. From this status, each time the
[PLAY MODE/TUNING MODE]
button is pressed, it changes the version display of module as
follows.
4. To date of module, press the
[DSGX]
or
[FUNCTION]
button.
5. To release from this mode, press three buttons of
[REPEAT/
FM MODE]
,
x
, and
[DSGX]
simultaneously.
Key Check
Procedure:
1. In the panel test mode (all LEDs and segments of fluorescent
indicator tube are turned on), press the
[PLAY MODE/TUNING
MODE]
button.
2. It displays “K 0 V0” on the fluorescent indicator tube.
3. Each time a button is pressed, “K” value increases. However,
once a button is pressed, it is no longer taken into account.
All keys are pressed, display becomes “K25”.
4. “V” value increases like 1, 2, 3 ... if turn the
[VOLUME]
knob
clockwise, or it decreases like 0, 9, 8 ... if turn the knob
counterclockwise.
5. To release from this mode, press three buttons of
[REPEAT/
FM MODE]
,
x
, and
[DSGX]
simultaneously.
[CD REPEAT 5 LIMIT CANCEL MODE]
Number of repeat for CD playback is 5 times when the repeat mode
is “REPEAT”. This mode enables CD to repeat playback for limitless
times.
Procedure:
1. Press the
@/1
button to turn the power on.
2. Press the
[FUNCTION]
button to select CD function.
3. Press three buttons of
ML
,
[PLAY MODE/
TUNING MODE]
, and
[DSGX]
simultaneously.
4. It enters the CD repeat 5 limit cancel mode and display “LIMIT
OFF”
5. To release this mode, press the
@/1
button to turn the power
off.
SECTION 5
TEST MODE
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299