HCD-GNX600
E Model
Australian Model
SERVICE MANUAL
MINI HI-FI COMPONENT SYSTEM
SPECIFICATIONS
Ver. 1.1 2006.10
– Continued on next page –
• HCD-GNX600 is the Amplifier,
CD player, tape deck and tuner
section in MHC-GNX600.
Model Name Using Similar Mechanism
HCD-GNX800
CD
CD Mechanism Type
CDM74KFS-F1BD81A
Section
Base Unit Name
BU-F1BD81A
Optical Pick-up Name
KSM-215DCP/C2NP
TAPE
Model Name Using Similar Mechanism
HCD-GNX800
Section
Tape Transport Mechanism Type
CWN42FF601
Amplifier section
The following are measured at
120 V, 220 V, 240 V AC,
50/60 Hz
Front speakers
DIN power output (rated)
130 + 130 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
160 + 160 watts(6 ohms at 1 kHz,
10% THD)
Sub woofer
Continuous RMS power output (reference)
200 watts
(4 ohms at 100 Hz,
10% THD)
TV (AUDIO) IN (phono jack)
voltage 250 mV,
impedance 47 kiloohms
MIC (phone jack)
sensitivity 1 mV,
impedance 10 kiloohms
Outputs
PHONES (stereo mini jack)
accepts headphones of
8 ohms or more
FRONT SPEAKER/SUB WOOFER OUT
Use only the supplied
speaker
Disc player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(
λ
=780 nm)
Emission duration:
continuous
Laser Output
Max. 44.6
µ
W*
* This output is the value
measured at a distance of
200 mm from the objective
lens surface on the Optical
Pick-up Block with 7 mm
aperture.
Frequency response
2 Hz – 20 kHz (
±
0.5 dB)
Wave length
780 – 790 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Tape deck section
Recording system
4-track 2-channel stereo
Frequency response
50 – 13,000 Hz (
±
3 dB),
using Sony TYPE I tape
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
9-887-199-02
2006J02-1
© 2006.10
