![Sony HBD-E2100 Service Manual Download Page 29](http://html.mh-extra.com/html/sony/hbd-e2100/hbd-e2100_service-manual_416347029.webp)
HBD-E2100/E3100/E3200/E4100/E6100
29
16. Version Up Test (Disc Update)
This screen performs version update test.
Operation:
[
m
]/[ ]
Activate the selected category.
[RETURN] Return to Service Top Menu.
Screen 1: Select to Start Update
Operation:
[ENT] Start Update
[RETURN] Return to Top Menu
Screen 2: Insert Update Disc
Operation:
[ ]
Tray Close and Check start
[RETURN] Cancel
Screen 3/ Screen 4
Operation:
Mounting and checking the disc
If disc OK, upgrading will start
Screen 5
Operation:
Wait until the display bar show 100%.
Insert Update Disc
[ENT] Tray Close and Check start
[RET] Cancel
HELP: [ENT][RET]
(Screen 2)
Version Update
Now, mounting and checking…
(Screen 3)
Version Update
Upgrading, do not shut down the power!
(Screen 4)
Version Update
(Screen 1)
Version Update
[ENT] Start Update
[RET] Return to Top Menu
HELP: [ENT][RET]
17. System Information (System Information Display)
This screen displays system information.
Screen 1: Basic Information
Operation:
[
,
]
Drive information (delta IOP of a drive is measured)
and wireless device information (not used) displayed
(go to Screen 2)
[RETURN] Returns to the top menu of the service mode
Screen 2: Drive and Wireless Information Menu
Operation:
[
<
]
Basic Information displayed (go to Screen 1)
[RETURN] Returns to the top menu of the service mode
When delta IOP is measured, it becomes impossible to use the Ver-
sion Up function.
Contents List:
Main LSIname
Model
Destination
Sequence Number
MAC
IP
IFCON IFCON
Version
Bootloader Bootloader
Version
Host Main
Host Main Version
MicroBE MicroBE
Version
Host Sub
Host Sub Version
Middleware Middleware
Version
ADSP ADSP
Version
ADSP Coeff
ADSP Coeff Version
IF Model
IF Dest
WLAN module Serial
WLAN module hw Version
WLAN module MAC Address
Drive Firm Revision
CD DIOP
Delta IOP
DVD DIOP
Delta IOP
BD DIOP
Delta IOP
CD LD TIME LD Time
DVD LD TIME LD Time
Bluetooth Device Address
Software update has started.
Never turn off while performing update.
When the update is complete, the unit will automatically turn off.
(Screen 5)
Software Update
55%