Sony HAP-Z1ES, Help Manual

Page: 147 / 206

HDD AUDIO PLAYER
HAP-Z1ES
Setting the Auto Standby function (Auto Standby)
If you set the Auto Standby function to [On], if you do not operate the HDD AUDIO PLAYER and do not play tracks for
approximately 20 minutes, the unit is automatically turned off and enters standby mode to reduce the power
consumption.
1. Select [Settings] - [System Settings].
2. Select [Auto Standby].
3. Select [On] (factory default setting).
Note
The Auto Standby function does not work during the following processes:
Updating the software
Formatting the hard disk drive
Rescanning a hard disk drive
Resetting the product (performing the Factory Reset function)
When the Sleep timer is working
Transferring music files from a computer
Hint
When the remaining time until the HDD AUDIO PLAYER enters the standby mode is less than 60 seconds, the
remaining time is shown on the screen.
When the HDD AUDIO PLAYER is in standby mode, you can start the HDD AUDIO PLAYER by pressing the
button or button on the remote control or the HDD AUDIO PLAYER, or by operating HDD Audio Remote (only
when the HDD AUDIO PLAYER is in Network Standby mode).
Related Topic
Standby modes
Notes on use
4-472-856-11(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
147