Sony HANDYCAM PMW-320K Operating Instructions Manual Download

Page: 101 / 179

Menu List

101

Ch
apt
er 6 Men

u and
Det
ail

ed Set

tings

Input/Output

Makes settings related
to I/O signals.

Output& i.LINK

HD&HDV

/SD&HDV/

SD&DV/480P (576P)

Selects the signals output from the
video connectors and the i.LINK
(HDV/DV) connector.

• When the HD/SD setting is SD,

“SD&DV” is selected.

• On 480P576P, “480P” can be

selected when the Country setting is
other than “PAL Area”, and “576P”
can be selected when the Country
setting is “PAL Area”.

23.98P Output

PsF

/Pull Down

When the video format is HQ 1920/
23.98P or HQ 1440/23.98P, selects
whether to use progressive output
(PsF) or pulldown output (Pull
Down).

Source Select

Camera

/i.LINK

Selects whether to use the video
camera picture (Camera) or the
signal input from the i.LINK (HDV/
DV) connector (i.LINK) as the video
input source.

i.LINK I/O

Enable/

Disable

Selects whether to enable or disable
input and output of signals via the
i.LINK (HDV/DV) connector.
When Enable is selected, you can
execute auto black balance
adjustment during i.LINK output.

SDI Output

/Off

Turns on or off the output of signals
from the HD/SD SDI OUT
connector.

HDMI Output

/Off

Turns on or off the output of signals
from the HDMI connector.

SDI/HDMI Out
Super

On/

Off

Turns on or off the superimposition
of text information on the output of
the HD/SD SDI OUT and HDMI
connectors.

Video Out Super

On/

Off

Turns on or off the superimposition
of text information on the output of
the VIDEO OUT connector.

OPERATION

Menu items

Sub-item

Settings

Description

Summary of Contents for HANDYCAM PMW-320K




















































































































































































Search results

Summary of Contents for HANDYCAM PMW-320K

Reviews:

Related manuals for HANDYCAM PMW-320K

Brands by name

Popular brands

Sony HANDYCAM PMW-320K, Operating Instructions Manual

Search results

Summary of Contents for HANDYCAM PMW-320K

Reviews:

Related manuals for HANDYCAM PMW-320K

Brands by name

Popular brands