39
R
e
co
rd
in
g/
Pl
ay
bac
k
KNEE
To set knee point and slope for video signal compression to reduce over-highlighting by
limiting signals in high contrast area of the subject to the dynamic range of your camcorder.
When you set the OUTPUT/DCC switch to ON, [KNEE] is automatically adjusted.
COLOR MODE
To set type and level of colors.
COLOR LEVEL
To set the color level.
COLOR PHASE
To set the color phase.
Item
Description and settings
[AUTO SET]
Available when you set the OUTPUT/DCC switch to ON
Sets the maximum point and sensitivity in the automatic mode.
[MAX POINT]
: Sets the maximum point.
90% ~ 100%
[SENSITIVITY]
: Sets the sensitivity.
HIGH/MIDDLE/LOW
[MANUAL SET]
Available when you set the OUTPUT/DCC switch to OFF
Sets the knee point and slope manually.
[POINT]
: Sets the knee point.
75% ~ 105%
[SLOPE]
: Sets the knee slope.
-5(gentle) ~ +5(steep)
Item
Description and settings
[TYPE]
Selects a type of colors.
[STANDARD]
: Standard colors
[CINEMATONE1] : Film camera image-like colors good with
[GAMMA] set to [CINEMATONE1]
[CINEMATONE2] : Film camera image-like colors good with
[GAMMA] set to [CINEMATONE2]
[ITU709 MTX]
: Colors corresponding to ITU709
[LEVEL]
Sets a color level when you set [TYPE] to the settings other than
STANDARD].
1 (close to color settings of [STANDARD]) - 8 (color settings of the
selected type)
Item
Description and settings
-7 (light) to +7 (dark), -8: black and white
Item
Description and settings
-7 (greenish) to +7 (reddish)
Continued
,
