70
Chapter 5
Adjusting and Setting Through Menus
Chapter
5
Adjusting and Setting
Through Menus
Operating Menus
The unit allows you to set various parameters in the
menus. Before you start using the unit, set the internal
clock in [CLOCK SET] in the [OTHERS] menu. Except
for clock setting, you can use all other factory-set
default parameters as they are, and change them as
needed.
You can save the set values for the unit in the internal
memory as VCR profiles. When the unit is used by
several people or used for multi purposes, save the set
value in [VCR PROFILE] of the [OTHERS] menu.
Using these saved profiles lets you quickly obtain
suitable unit settings later.
• Do not pull out the power cord plug while operating
the menus. Otherwise, the settings of the menu may be
changed accidentally.
• If the internal backup battery is exhausted, the time set
in the internal clock, the [60i/50i SEL] setting, and the
time code of the [FREE RUN] setting will be
initialized. The internal backup battery is fully charged
if you connect the power to the unit for about 24 hours.
A fully charged internal battery can run for about 1
month.
Changing a menu setting
1
Press the MENU button.
2
Pressing the
J
/
j
buttons, select the menu icon you
want to change, then press the EXEC button.
3
Pressing the
J
/
j
buttons, select the submenu you
want to change, then press the EXEC button.
4
Pressing the
J
/
j
buttons, change the setting.
5
Press the EXEC button to return to the submenu.
6
Repeat steps
1
to
5
, as needed.
To return to the previous menu level, press the
J
/
j
buttons and select [
RETURN].
You can use the
K
/
k
buttons to move the menu
cursor and to adjust or increase/decrease setting values.
Notes
