91
Cus
to
m
iz
ing yo
ur ca
m
co
rder
CLOCK/ LANG
(Items to set clock and language)
Touch
1
, then
2
.
If the item is not on the screen, touch
v
/
V
to change the page.
How to set
(HOME MENU)
t
page 80
(OPTION MENU)
t
page 92
See page 35.
You can adjust a time difference without
stopping the clock.
Set your local area using
v
/
V
when using
your camcorder overseas.
Refer to the world time difference on page
128.
You can change this setting without
stopping the clock.
Set to [ON] to move the time forward
1 hour.
You can select the language to be used on
the LCD screen.
z
Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot
find your native tongue among the
options.
GENERAL SET
(Other setup items)
Touch
1
, then
2
.
If the item is not on the screen, touch
v
/
V
to change the page.
How to set
(HOME MENU)
t
page 80
(OPTION MENU)
t
page 92
The default settings are marked with
B
.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you slide the POWER switch
to
(Movie).
• The demonstration will be suspended in
situations such as those described below.
– When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes).
– When you slide the disc cover open switch.
– When you remove or insert a “Memory Stick
Duo.”
– When you set the POWER switch to
(Still).
– When you press
(HOME)/
(VIEW
IMAGES).
The camera recording lamp will not light up
during recording when you set this to
[OFF]. (The default setting is [ON].)
See page 136.
CLOCK SET
AREA SET
DST SET/SUMMERTIME
LANGUAGE SET
DEMO MODE
REC LAMP (Recording
lamp)
CALIBRATION
Continued
,
