0
GB
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
in a cool place.
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it in a cool place.
The temperature of your camcorder is low.
Make the camcorder warm.
No memory card is inserted (p. 19).
When the indicator flashes, there is not
enough free space for recording images. Delete
unnecessary images (p. 34), or format the
memory card after storing the images on other
media.
The Image Database File is damaged. Check
the data base file by touching
(MENU)
[Setup]
[ (Media Settings)]
[Repair Img. DB F.]
the recording medium.
The memory card is damaged. Format the
memory card with your camcorder (p. 55).
Incompatible memory card is inserted (p. 19).
The memory card is write-protected.
Access to the memory card was restricted on
another device.
There is something wrong with the flash.
The amount of light is not sufficient. Use the
flash (HDR-PJ50E/PJ50VE).
The camcorder is unsteady. Hold the
camcorder steady with both hands. However,
note that the camera-shake warning indicator
does not disappear.
The drop sensor function is activated. You
may not be able to record nor play back
images.
The recording media is full. Delete
unnecessary images (p. 34).
Photos cannot be recorded during processing.
Wait for a while, then record.
When [
REC Mode] is set to [Highest
Quality
] or [50p Quality
], you cannot
capture photos while recording movies.
Furthermore, if [
Frame Rate] is set to
[25p] (HDR-PJ50E/PJ50VE), you cannot
record photos while the camcorder is in movie
recording standby mode.
Summary of Contents for Handycam HDR-PJ50E
Page 75: ......
