Sony Handycam HDR-HC1E Operating Manual Download Page 58

Page: 58 / 119

HDR-HC1E 2-631-478-11(1)

STANDARD SET menu (Continued)

back.

• appears for a picture recorded using a ﬂash.
• In the DATE/TIME data display, the date and

time are displayed in the same area. If you
record a picture without setting the clock, [-- --
----] and [--:--:--] will appear.

REMAINING



AUTO

Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.

• When you set the POWER switch to PLAY/

EDIT or CAMERA-TAPE with a cassette
inserted.

• When you touch

(Play/Pause).

Always displays the remaining tape
indicator.

REMOTE CTRL (Remote control)

The default setting is [ON], allowing you to
use the Remote Commander (p. 32).

• Set to [OFF] to prevent your camcorder from

responding to a command sent by another VCR
remote control unit.

REC LAMP (Recording lamp)

The camera recording lamp will not light
up during recording when you set this to
[OFF]. (The default setting is [ON].)

BEEP



A melody sounds when you start/stop
recording, or operate the touch panel.

OFF

Cancels the melody.

DISP OUTPUT



LCD PANEL

GUIDEFRAME

You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON]. The
frame is not recorded. Press DISPLAY/
BATT INFO to make the frame disappear.

• Pointing the subject at the cross point of the

guide frame makes a balanced composition.

COLOR BAR

You can display the color bar or record it
on the tape by setting [COLOR BAR] to
[ON]. It is convenient to adjust the color on
the monitor connected.

DATA CODE

During playback, displays the information
recorded automatically (data code) during
recording.



OFF

Data code is not displayed.

DATE/TIME

Displays the date and time.

CAMERA DATA (below)

Displays camera setting data.

0:00:00:00

60min

AWB

100

9dB

F1. 8

AUTO

1
2



SteadyShot off



Exposure



White balance



Gain



Shutter speed



Aperture value

Appears only during tape playback.

• The exposure adjustment value (0EV), a shutter

speed, and the aperture value appear when still
images on a “Memory Stick Duo” are played

Summary of Contents for Handycam HDR-HC1E
























































































































Search results

Summary of Contents for Handycam HDR-HC1E

Reviews:

Related manuals for Handycam HDR-HC1E

Brands by name

Popular brands

Sony Handycam HDR-HC1E, Operating Manual

Search results

Summary of Contents for Handycam HDR-HC1E

Reviews:

Related manuals for Handycam HDR-HC1E

Brands by name

Popular brands